1985zcar

iTrader: (1)

Hm...gimme your Equips

1siksc

iTrader: (8)

amazing thread, but did SC300TT! die? i haven't seen him post on here for about a year.

wanganstyl

iTrader: (5)

looks it. there are decent amout of wiring diagrams avail, but nobody who has done is is willing to share. BOO! :P

1siksc

iTrader: (8)

I am talking to a company right now and i have searched on mkiii thread on their aristo swaps and it turns out that there are differences for every aristo year engine and the best way to figure out the wiring is to trace it from off of the ecu. So hopefully tomorrow i can will start but some of my harness is missing so i cant get all of the info right away!~ btw the company makes wiring harness adapters for turbo timers and so on and i will be talking with them for hopefully making an aristo swap harness. =) but i would have to figure out the year engine and such i have.

Nthusiastt

are all these wiring nightmares voided if you run an aem ems?

RX7 RAGE

iTrader: (18)

I'll be running a haltech e6x in my swap so I don't have to deal with this wiring nightmare.

Nthusiastt

can you explain?

DKNY0331

i see that turbo city does no longer rebuild the twin turbos anymore..........
or the rx7 turbos

dejacky

iTrader: (2)

nice thread

TougeSC3

iTrader: (2)

Very good thread. I'm suprised something like this isn't stickied.

7sins

I would love to see some detailed wiring diagrams or an attachment in this thread.

soarer13oy

iTrader: (13)

look up wanganstyl on the forums he has a diagram

ClearP

That diagram is for JDM supra harness, not Aristo.

"SC300's AC compressor is being used. You will need to make a 12VDC .5A "high sensitivity" relay so your AC Control Module will communicate correctly with Aristo ECU to activate compressor clutch via MGC signal line."

Did anyone do this part?

RLJ

Great works , doing a 2jz swap and this will be very helpfull.
Thanks.

zmr2

thank you for all the information for the write-up!