DETUNED

I'm about to purchase my FMIC and was wondering if the dimensions of a greddy 4 row will fit in the front of a SC300 without too much cutting.

The dimensions of the 4 row is=24X12X5.25 and the intercooler i'm interested in is 24X12X4.5 Its actually closer to the greddy three row which is 24X12X4.

So my question is will a intercooler between those greddy FMICs sizes fit in a SC300?

I'm using the stock bumper.

siniquezu

If it's a 92-93 I believe it may hang a little low without SC4 lip.

mamurra2

you'll probably have to move the coolant overflow container, but other than that there is tons of room up front

TGRich

pm acleansc4
He put a huge FMIC on the tt and he might be able to give you dimensions

kaotiq

im not sure if this helps... it might. I used the A'pexi GTR intercooler. The only thing i really had to move was the safety reinforcement bar. Everything else fit just perfectly with endtanks.

mteele

iTrader: (5)

Cool, I'll keep that in mind for when I do mine

siniquezu

Yeah but it has the autocouture kit.

ACleanSC4

iTrader: (7)

Here's a link to a writeup of the custom intercooler I had made for the TT...It's a perfect fit without cutting of the front bumper reinforcement.
http://www.lextreme.com/scic.html

'doh

TGRich

Forgot the link Tony