Post your project progress here.
Driver
Joined: Mar 2008
Posts: 188
Likes: 0
From: washington
ok, here they are... so I actually have 4 pillows and 2 neck rests and they are all in excellent condition and I stored them in the original packaging and then in a box for all these months. The cushion pillows are made of the satin silk material and the the neck rests are either leather or vinyl but these are all authentic... PM me if you are interested.
Pit Crew
Joined: Dec 2009
Posts: 181
Likes: 2
From: Wa
Swapped the JIC coils in on Saturday night. Was at my friends dad's shop until about 1 am doing work. Installation wasn't too bad seeing as how each strut consists of about 4 bolts that hold it in. Pulling the rear seats was a PIA but we figure it out. Still getting used to coilovers but definitely like the feel over the stock suspension. Temporary wheels and ride height adjustment tomorrow.
Driver School Candidate
Joined: Feb 2010
Posts: 8
Likes: 0
From: wa
just got my car about 3 weeks ago.. still a work in progress...
stock height on is300 wheels
lowered
then on weds kranze 19x8.5 35 offset in front and 28 in the back
coming soon: another 1.5 inch drop all around, new front and rear bumpers, 10mm spacers in the back..
stock height on is300 wheels
lowered
then on weds kranze 19x8.5 35 offset in front and 28 in the back
coming soon: another 1.5 inch drop all around, new front and rear bumpers, 10mm spacers in the back..
Driver School Candidate
Joined: Feb 2010
Posts: 20
Likes: 0
From: west seattle, wa
ok, here they are... so I actually have 4 pillows and 2 neck rests and they are all in excellent condition and I stored them in the original packaging and then in a box for all these months. The cushion pillows are made of the satin silk material and the the neck rests are either leather or vinyl but these are all authentic... PM me if you are interested.
Driver
Joined: Mar 2008
Posts: 188
Likes: 0
From: washington
Anyone interested in my rims? my rims are actually special ordered to fit the IS300 flush with the right size tires. It just looks bigger on my car because I have fatty tires on them. They are DCR Forged REAL 3-piece Catalunya 19x8 and 19x10.5...offset is unknown and not stamped but its designed for the IS300. Will also fit an ISX50 flush with right tire size also (I still have the rear tires that will fit the ISX50 flush). One of the front chrome lip is peeling and all the centers are chipped. They are perfect for someone who wants to powder coat the centers a different color and to anodize the lips a different color also. $2,000 FIRM with tires (a lot of tread left on all of them due to that I have no camber wear).
Driver School Candidate
Joined: Feb 2010
Posts: 20
Likes: 0
From: west seattle, wa