Lust4Lexus

So, My wife and I are expecting our first child, a baby boy. Very excited and so I am going to be getting rid of some things that I have no use for. Check it out. I am also on another forum for Maximas, used to have one, and so in the picture you will see various nissan accessories. Pay no attention to them, unless you have a 4th Gen Maxima as well. I am cutting and pasting from the other thread I posted. Thanks so much for looking!!!


So, here is a pic of all my stuff I'm going to sell.

First things I would like to sell.

4th gen red clears. (THESE ARE NOT HOMEMADE ONES- THEY ARE REAL CUSTOM MAXIMA ONES) Perfect condition. 80.00


i30 tilting headrests 60.00

i30 auto dimming mirror 35.00

Clear corners diamond cut 20.00 for whole set


Alpine MRV-352 V12 Amp. 5 channel 50*4 +150 for sub. (perfect for a SQ setup that you don't need a lot of thump. 150.00

Carion DRZ-9255- Google this deck- it's the be all end all as far as SQ is concerned. copper chassis, ETC, HUGE power supply. This is not a circus show in your dash like the junk they sell in Best buy. It is an audiophile piece of equipment that is highly regarded in the audio circles. It is what you want to win SQ comps. 500.00

Audio control OVERDRIVE line driver 60.00

Soundtream VAN GOH 800.2 Audiophile amp. Not working. powers up but no sound. but could very well just be a fuse. Take a chance and for 75 bucks and you could have the deal of the century.
2 X 200 RMS 4 Ohm
2 X 400 RMS 2 Ohm
1 X 800 RMS 4 Ohm Mono
RUBI™ (Rapid-Use Branched Impulse) Proprietary power supply topology
STACT™ (STabilized Apex Current Topology) Reduces power supply stress by 50%
Trident™ Amplifier protection topology
Ultra Low ESR Capacitance bank ensures rapid power delivery for dynamic peaks
Continuously variable 12dB low-pass crossover (30Hz to 4kHz)
IDI™ (Intelligent Distress Indicator) gives visual amplifier protection status
Triple Darlington OUtput Circuitry
Continuously variable high and low pass crossovers with 12 dB / Octave slope (30-4KHz)
Vortex induction fan for thermal management
Platinum RCA Line inputs and outputs
Platinum 4 gauge power inputs
Rail stabilization protection circuitry
Tri-mode operation
BIP™ Bias Input Protection
Harmonic Bass Alignment™ Produces tighter, more accurate bass reproduction
Bi-Linear selectable 2 way crossovers for amplifiers and line outs
10Hz - 50 KHz Frequency response
>115dB S/N ratio
>500 Damping
.15V - 12.0V Input sensitivity
0.02% THD
50.00

PPI 2360 2 channel amp 90X2 40.00

Kenwood KCA 420 ipod interface for kenwood headunits. 20.00

MB Quart RWE160 6.5 Midbass drivers 40.00 for both

Alpine SPR-176A 6.5 Midbass drivers 50.00 for both

ED edi 6.5 midbass drivers 60.00 for both

Thats it for now.

Kinda holding out on the JL Stuff for now, but you can shoot me an offer if you want. Here is what I've got.
slash 1000/1 amp
slash 300/4
12w7 prowedge

THANKS FOR LOOKING!