Help Me Save My Door Edges
#16
Alternatively, FWIW, I use Xpel film along the door edges (on the LX). It's perhaps a bit more costly, but I like that it's virtually invisible. My wife and kids are pretty careful, but just in case...
The following users liked this post:
pryorsmith (04-03-18)
#17
You can buy any number of protective films to go along the door edges. My recommendation would be to take it to a window tint/clear bra shop. They will be able to apply a custom PPF to the edges for you.
The following users liked this post:
pryorsmith (04-03-18)
#20
Former Sponsor
You probably got better at installing them the 2nd time.
OP, you could potentially put a little touch up paint on those chips and then cover the edges with PPF. Let me know if I can recommend an installer or if you would prefer to find the parts for a DIY install.
OP, you could potentially put a little touch up paint on those chips and then cover the edges with PPF. Let me know if I can recommend an installer or if you would prefer to find the parts for a DIY install.
#21
If you install the Lexus door edge guards do yourself a favor and obtain a printout of the directions from a dealer. Directions will not come in the package. I was amazed at how detailed the directions are when I installed the Toyota door edge guards on my Sienna. Yes remove the wax, I used a 3M product made for bumper sticker removal to do this-picked it up at pep boys. The directions also called for hitting the guards with a mallet in specific areas in a specific order. Last but not least the directions required cutting out what amounted to a paper guide to tape to the door handle in order to be exact with the location of the guard. These have been mounted on my Sienna for three years without a hitch.
Thread
Thread Starter
Forum
Replies
Last Post
bentleymp2
GS - 3rd Gen (2006-2011)
10
11-10-11 01:39 PM