LS remote start install DIY
#301
I doubt they would have gone much lower. When I first saw it, it was at $34K, and I got them down to $32K but he didn't seem to want to go lower to make the sale to me by the EOY. He said he had arranged to sell it to a dealer in IL for $31K, for what that's worth. If I was truly interested, I would have asked him why he wasn't willing to sell it to me for $31K but maybe that price was without the L-certified warranty because he had said I could buy it for $31K without the warranty. I thought the L-certification was worth $1K more. I think you did fine! I assume that was price of the car PLUS dealer fee, tax, tags, title/registration?
#302
Instructor
UPDATE:
The Dball3 whatever unit I had installed recently somehow had some sort of issue with the auto-headlight on/off stuff interfering, where the lights would shut off right away, without delay.
See my thread here:
https://www.clublexus.com/forums/ls-...-question.html
I called my installer after getting off of the phone with Lexus, and he said it may be a firmware issue, saying he may have to move it to an older update of the firmware, stating the newer toyotas sometimes had this issue.
Perhaps that is why recently lately my headlights were acting up, but not within the month that I first had the remote start installed??
We will see, supposed to have this looked at by my installer next Wednesday, but lately he hasn't been too good on keeping up with communications.
The Dball3 whatever unit I had installed recently somehow had some sort of issue with the auto-headlight on/off stuff interfering, where the lights would shut off right away, without delay.
See my thread here:
https://www.clublexus.com/forums/ls-...-question.html
I called my installer after getting off of the phone with Lexus, and he said it may be a firmware issue, saying he may have to move it to an older update of the firmware, stating the newer toyotas sometimes had this issue.
Perhaps that is why recently lately my headlights were acting up, but not within the month that I first had the remote start installed??
We will see, supposed to have this looked at by my installer next Wednesday, but lately he hasn't been too good on keeping up with communications.
#303
Racer
If you read though this thread... in the first 5-10 pages or so, pretty sure the headlight issue is a known issue...for someone who did more than the 5 wire install.
This was a very simple DIY, some red T-Clips and this whole thing was done in about 45 min... and I'm not great at wiring...
This was a very simple DIY, some red T-Clips and this whole thing was done in about 45 min... and I'm not great at wiring...
#304
Instructor
If you read though this thread... in the first 5-10 pages or so, pretty sure the headlight issue is a known issue...for someone who did more than the 5 wire install.
This was a very simple DIY, some red T-Clips and this whole thing was done in about 45 min... and I'm not great at wiring...
This was a very simple DIY, some red T-Clips and this whole thing was done in about 45 min... and I'm not great at wiring...
I swear I read through this all but I must have been mistaken, can you direct me to the 'fix'? Perhaps I can somehow show this to my guy in case if anything was missed on my 2013 LS.
Edit: it's just odd that this 'headlight issue' would happen nearly a month after the install when prior to that, I had zero issues post-install.
Last edited by tofuprod; 01-09-18 at 06:09 PM.
#305
Lexus Test Driver
iTrader: (1)
I just sent my dball3 back to the eBay seller Doug. Roadfrog posted the link early in the thread. I could not get the module to program. I hooked all the wires up and hit the ignition twice like it says in the instructions and could not get a green light which indicates its programmed. I even hit the ignition 3 times like roadfrog suggested even though that's not what the instructions tell you to do and all it does is shut the car down. I sent it back for a replacement because i didn't think he flashed it with the old firmware which he assured me he did. Maybe I'm doing something wrong.
#307
Driver School Candidate
Join Date: Jun 2016
Location: TEXAS
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
I just got this installed by Best Buy last Sunday for 125 plus tax since I bought the pre flashed dball3 they erased it and reinstalled the firmware they say they do that to make sure you have the right one he told me I could have bought the regular dball3 that’s not flashed since they were going to do it anyway total cost for me was around $200 they also sell the viper smart start vsm300 with installation for 189.99 here in Texas which I’m getting at a later date
Last edited by Kadrian87; 01-10-18 at 11:55 PM.
#308
^^ since you got a dball why dont you just buy the smart start and install ot yourself itll be cheaper that way(99$). You litterally just connect it to the back of your dball and ground the unit thats it.
#309
DBall
anyone else having issues with remote starting?
So I have an 07 460L and I installed the DBall2 and viper modules a few years back. Now I’m noticing that the 3x lock/start feature isn’t starting the car; it works at random times. Same with the Viper app; works when it wants to. It will lock and unlock but not start! I read somewhere about hard and soft resetting but I didn’t want to screw with anything before checking here. Thanks team
Ray
So I have an 07 460L and I installed the DBall2 and viper modules a few years back. Now I’m noticing that the 3x lock/start feature isn’t starting the car; it works at random times. Same with the Viper app; works when it wants to. It will lock and unlock but not start! I read somewhere about hard and soft resetting but I didn’t want to screw with anything before checking here. Thanks team
Ray
#310
Racer
I've noticed that using the 3X lock dball3 remote start.... The heated seats don't come on as they are on when I shut off the car. Is this because the seat sensor is not pushed down? Any work-a-round for this?
If it does not heat, does it cool in the summer or am I in the same boat ?
If it does not heat, does it cool in the summer or am I in the same boat ?
#311
Lexus Fanatic
I've noticed that using the 3X lock dball3 remote start.... The heated seats don't come on as they are on when I shut off the car. Is this because the seat sensor is not pushed down? Any work-a-round for this?
If it does not heat, does it cool in the summer or am I in the same boat ?
If it does not heat, does it cool in the summer or am I in the same boat ?
#312
Racer
I was thinking it was a sensor like the air bag notification, seat not heating up unless it detects pressure on the seat.
I did notice there was never any calibration updates on my car(odd as the car was serviced at Lexus)... Even when I connect to my version of Techstream, it shows the calibration version and it's from 2007....could it be something like this in getting a car update that could fix it ?
#313
Will this work on a 2011 LS460
I have read through the thread but am a bit confused on the latest version of DBall and what it will work with.
This is the link to ebay.
https://www.ebay.com/itm/301085632013?rmvSB=true
Will it work on a 2011 460 with ML/NAV?
Here is a second one I found on Ebay.
Anyone have any experience with this one?
https://www.ebay.com/itm/Complete-Ad...laZnRG&vxp=mtr
I would like to be able to start the car with the OEM remote, 3x on the lock, and not have to carry a second remote.
I am ok with installing this myself, just want to be sure it will work.
Appreciate the help.
Thanks
This is the link to ebay.
https://www.ebay.com/itm/301085632013?rmvSB=true
Will it work on a 2011 460 with ML/NAV?
Here is a second one I found on Ebay.
Anyone have any experience with this one?
https://www.ebay.com/itm/Complete-Ad...laZnRG&vxp=mtr
I would like to be able to start the car with the OEM remote, 3x on the lock, and not have to carry a second remote.
I am ok with installing this myself, just want to be sure it will work.
Appreciate the help.
Thanks
Last edited by Luscombe8A; 04-15-18 at 07:46 PM. Reason: Second Ebay ref.
#314
Driver School Candidate
I have read through the thread but am a bit confused on the latest version of DBall and what it will work with.
This is the link to ebay.
https://www.ebay.com/itm/301085632013?rmvSB=true
Will it work on a 2011 460 with ML/NAV?
Here is a second one I found on Ebay.
Anyone have any experience with this one?
https://www.ebay.com/itm/Complete-Ad...laZnRG&vxp=mtr
I would like to be able to start the car with the OEM remote, 3x on the lock, and not have to carry a second remote.
I am ok with installing this myself, just want to be sure it will work.
Appreciate the help.
Thanks
This is the link to ebay.
https://www.ebay.com/itm/301085632013?rmvSB=true
Will it work on a 2011 460 with ML/NAV?
Here is a second one I found on Ebay.
Anyone have any experience with this one?
https://www.ebay.com/itm/Complete-Ad...laZnRG&vxp=mtr
I would like to be able to start the car with the OEM remote, 3x on the lock, and not have to carry a second remote.
I am ok with installing this myself, just want to be sure it will work.
Appreciate the help.
Thanks
#315
Hey Guys,
I need some help with my remote start install. I got everything from Toby Broadfield who has been awesome with helping me. I have a 2014.
I got the dball3 and the smart start.
I got all the wiring correct. I used Ttaps to make all the connections.
When I fired it up it flashes green the starts to flash red red orange. I worked with Toby verifying each and every connection. He then mailed me a second dball3. When I got the new one I plugged the harness into it I got solid red light which was good. I then pressed on the start button twice and then it started doing red red orange again.
I unplugged it again and put it back together and from that point on it was green when I plugged it in the flashes red red orange from then on just like the first unit.
Do you think I am doing something to clear the programming? I never pushed the button? Anyway I can program it myself?
I did want to note I have been pushing the start button twice but never had stepped on the brake. I don’t think that is causing it but wanted to mention that.
I need some help with my remote start install. I got everything from Toby Broadfield who has been awesome with helping me. I have a 2014.
I got the dball3 and the smart start.
I got all the wiring correct. I used Ttaps to make all the connections.
When I fired it up it flashes green the starts to flash red red orange. I worked with Toby verifying each and every connection. He then mailed me a second dball3. When I got the new one I plugged the harness into it I got solid red light which was good. I then pressed on the start button twice and then it started doing red red orange again.
I unplugged it again and put it back together and from that point on it was green when I plugged it in the flashes red red orange from then on just like the first unit.
Do you think I am doing something to clear the programming? I never pushed the button? Anyway I can program it myself?
I did want to note I have been pushing the start button twice but never had stepped on the brake. I don’t think that is causing it but wanted to mention that.