Avest/SpecD LS460 LED Tail Lights
Lexus Test Driver
Joined: Apr 2011
Posts: 1,379
Likes: 7
From: Wa
Yes they are the same within model years 07-09.
There's a set on EBay, just search ls460 led tail lights. I believe there's one left in stock. Sorry doesn't allow me to link with my phone for some reason.
Lexus Fanatic
Joined: Jan 2014
Posts: 5,371
Likes: 526
From: BC Canada
Driver
Joined: Apr 2012
Posts: 128
Likes: 2
From: MS
Lexus Fanatic
Joined: Jan 2014
Posts: 5,371
Likes: 526
From: BC Canada
Have anyone have problem with your tail lights? I'm talking about just the brake lights itself, all the other section of the led tailights works except for the brake light. When I step on my brakes my lights most of the time won't come on and other times when I step on my brakes not all of my lights up and are real dim and flickering. But on my passenger side every light works as it suppose to. Have anyone try to replace the led and taken the lense cover off? I want to know cause I want to replace the individual led that doesn't work. I really don't want to purchase another set. I do have resistors on my tail light in case anyone is wondering. Any help would be appreciated.
Could it be just some of the wires is not connected well where it's soldered on? Or just the led is dying or burnt out.
Could it be just some of the wires is not connected well where it's soldered on? Or just the led is dying or burnt out.
Last edited by Tdvlexo; Oct 18, 2015 at 09:15 AM.
Lexus Fanatic
Joined: Jan 2014
Posts: 5,371
Likes: 526
From: BC Canada
No problems here and mine were "plug n' play"....no resistors required (other than what the kit came with). Yours should have been the same. Did you buy Avest? Did yours perhaps leak water into them?
Last edited by roadfrog; Oct 18, 2015 at 09:38 AM.
Mine are plug n play also, came with resistors. I think mine are spec d and no leaks or any sign of moisture inside. Wondering if it's easy to replace the individual led or if it can be replaced.
Advanced
Joined: Oct 2015
Posts: 532
Likes: 143
From: New York
Just ordered an Avest set from japan . I was wondering after seeing the specD install video they did not use any gaskets . Is it mandatory or optional to use the included gaskets. The set that i ordered have sequential yellow turn signal .
