Oxygen sensor Bank one sensor one
#1
Driver School Candidate
Thread Starter
Join Date: Dec 2012
Location: NZ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Oxygen sensor Bank one sensor one
Can anybody help me ? I have had the left front ( Bank one Sensor one ) Oxygen sensor replaced on my 2001 LS430 in a friends repair shop ,the sensor that I supplied is a Bosch one with the proper plug on it . Apparently in the process of removing the old one they managed to tear the pug off the main loom . I need to know the colours or the position in the plug of the wires so that the new sensor can be installed correctly ,the plug is still on the new sensor so no problem there.
Here is hoping !
I am in New Zealand so the car is right hand drive .
Here is hoping !
I am in New Zealand so the car is right hand drive .
Last edited by Bourke; 12-02-12 at 03:45 PM. Reason: Hesitation .I am a first time poster
#4
Driver School Candidate
Thread Starter
Join Date: Dec 2012
Location: NZ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
The sensor has different coloured wires to the loom it`s the loom one that is pulled off. He is still my friend of course plus he is the one with the hoist,we just want to know what the position of the wires are feeding in to the sensor plug .Also all of the other sensors have different coloured wires as well .Go figure?
The wires are torn out of the plug there are no traces of them left to indicate what goes where.
The wires are torn out of the plug there are no traces of them left to indicate what goes where.
Last edited by Bourke; 12-02-12 at 08:42 PM. Reason: Added to text
Thread
Thread Starter
Forum
Replies
Last Post