Notices
LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

driver seat heater

Thread Tools
 
Search this Thread
 
Old Apr 27, 2012 | 05:23 AM
  #1  
gs4bkny's Avatar
gs4bkny
Thread Starter
Driver
15 Year Member
 
Joined: Jul 2006
Posts: 188
Likes: 0
From: NY
Default driver seat heater

my drivers side seat heating function if not working.....when i turn the switch to ventilation it works but when i switch it over to heat, nothing happens. I would like to know if any of you have any trouble shooting tactics to diagnose this problem or fix it before I got to the lexus dealership and bend over!
Reply
Old Apr 27, 2012 | 07:07 AM
  #2  
jimbosr1's Avatar
jimbosr1
Pole Position
Veteran: Air Force
15 Year Member
Liked
Loved
 
Joined: Sep 2010
Posts: 2,076
Likes: 233
Default

if yours is cpo?they will replace the seat,if not dont go to the dealer,they will charge you so much money it will make your knees knock.go to auto apolstery shop and have them do it.you just need to make shore the switch works and if it does its your seat heater.lexus would have your seat delivered to a apolstry shop anyway and charge you.to check the switch you will need to swap the switch plugs with the passenger seat and try it

Last edited by jimbosr1; Apr 27, 2012 at 07:10 AM.
Reply
Old Sep 25, 2012 | 06:15 AM
  #3  
wayner1970's Avatar
wayner1970
Driver School Candidate
 
Joined: Feb 2011
Posts: 4
Likes: 0
Default Seat Heater Malfunction

Originally Posted by gs4bkny
my drivers side seat heating function if not working.....when i turn the switch to ventilation it works but when i switch it over to heat, nothing happens. I would like to know if any of you have any trouble shooting tactics to diagnose this problem or fix it before I got to the lexus dealership and bend over!
My problem with the passenger seat heater malfunction is with the switch on the '06 ES330. The heater stays on even after the dial is turned back to neutral between the cool and heat. But when I press hard on the panel at the base of the retractable switch, it goes off again. Sometimes it comes on again by itself, but if I press the panel again, it goes off. This leads me to suspect it's the switch itself that's the problem. I'm sure if I open that up, I may find the switch loose. Hopefully, I can reset it.
Reply
Old Sep 25, 2012 | 06:35 AM
  #4  
jimbosr1's Avatar
jimbosr1
Pole Position
Veteran: Air Force
15 Year Member
Liked
Loved
 
Joined: Sep 2010
Posts: 2,076
Likes: 233
Default

your switch has a short.i would remove it and inspect it.if it looks good put a new switch in there.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aqualung
ES - 1st to 6th Gen (1990-2018)
1
Mar 23, 2015 08:05 PM
dbs600
LX - 1st and 2nd Gen (1996-2007)
3
Apr 28, 2012 04:50 PM
ldfog
ES - 1st to 6th Gen (1990-2018)
2
Dec 3, 2009 11:20 AM




All times are GMT -7. The time now is 01:01 AM.