Aftermarket Amp install + Wiring
#1
Aftermarket Amp install + Wiring
the tools you will need to accomplish this task
the amp kit i got off amazon for $30bucks and loc for $11bucks
your entry position
remove this thing (alarm horn?) unless you have girly hands
punch through here.. make sure you tape the tip of the screwdriver really well or there will be a series of f bombs throughout the night
coming out from the other side of firewall
pull power wire through without the screwdriver of course
pull up... they are held in place by clips
do the same thing and run the wire to the rear
yank up... this might take several tries unless you are muscular like me
10mm bolt... 2 on each side
lift up the head rest... theres a 10mm bolt behind the tab... you will need a deep socket for this... 3 bolts total
these two plastic little pieces are the devil but not for me since im muscular
find a hole on the deck that goes through trunk
night has fallen... getting lazy with pics... no pics of getting to the amp from trunk upholstery... if you dont know how then i dont know how you even made it this far
the amp kit i got off amazon for $30bucks and loc for $11bucks
your entry position
remove this thing (alarm horn?) unless you have girly hands
punch through here.. make sure you tape the tip of the screwdriver really well or there will be a series of f bombs throughout the night
coming out from the other side of firewall
pull power wire through without the screwdriver of course
pull up... they are held in place by clips
do the same thing and run the wire to the rear
yank up... this might take several tries unless you are muscular like me
10mm bolt... 2 on each side
lift up the head rest... theres a 10mm bolt behind the tab... you will need a deep socket for this... 3 bolts total
these two plastic little pieces are the devil but not for me since im muscular
find a hole on the deck that goes through trunk
night has fallen... getting lazy with pics... no pics of getting to the amp from trunk upholstery... if you dont know how then i dont know how you even made it this far
Last edited by sr20mofo; 03-23-14 at 07:57 PM.
#2
red arrow pointing to the middle clip... thats your subwoofer wires
yellow = right positive
black = right negative
green = left positive
blue = left negative
all 4 wires tapped using your loc
blue arrow 3rd clip is where you are going to tap for the remote wire... its the gray wire next to the pink wire
hook everything up and cross fingers
SUCCESS!!!
time it took 5hrs... didnt know what i was doing... looking for tools and info can be challenging
hope this answers all the questions about which wires to tap
yellow = right positive
black = right negative
green = left positive
blue = left negative
all 4 wires tapped using your loc
blue arrow 3rd clip is where you are going to tap for the remote wire... its the gray wire next to the pink wire
hook everything up and cross fingers
SUCCESS!!!
time it took 5hrs... didnt know what i was doing... looking for tools and info can be challenging
hope this answers all the questions about which wires to tap
Last edited by sr20mofo; 03-23-14 at 08:01 PM.
The following users liked this post:
LS430cb (04-18-17)
Trending Topics
#8
Driver School Candidate
You're the ***** man. Nice job. Your commentary is actually what got me through it! I plan on doing similar, but considering using an audiocontrol LOC so I can get full range signal.. w/ ppi amp. What sub you using?
#10
Lexus Test Driver
iTrader: (9)
Honestly the amp is great for the price, I paid like $150 for mine brand new, best part is it comes with a bass controller.
But what I mean is 'dirty bass' is it can be sort of rough around the edges, not very clear all the time , in some songs with a lot of bass it is can be very distorted.
I want to either sell my whole set up for a single JL or at least sell my amp for a Rockford fosgate.
#11
Driver School Candidate
Join Date: Mar 2014
Location: oh
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
back a while ago i did that for fun for other people
2000 watt amps to a pair of 12" subs anther 1k for the cabin speakers.
but as cars stated to integrate the audio system more and more i got leery about tearing into stuff.
some cars have to have the stock head unit relocated to the trunk as its used by the computer to relay messages.
I have nothing but respect for you. you were willing to tear into this rolling computer and go for it.
well done.
2000 watt amps to a pair of 12" subs anther 1k for the cabin speakers.
but as cars stated to integrate the audio system more and more i got leery about tearing into stuff.
some cars have to have the stock head unit relocated to the trunk as its used by the computer to relay messages.
I have nothing but respect for you. you were willing to tear into this rolling computer and go for it.
well done.
#12
Driver School Candidate
Join Date: Mar 2014
Location: oh
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
i might add. rubber gromets are availabe at the local parts place. this allows you to pick a spot and drill a hole where its suits you. just make sure there isnt a computer on the other side.
Walmart used to have the best priced installation kits. I would save 10 or 15 bucks over my wholesalers.
Walmart used to have the best priced installation kits. I would save 10 or 15 bucks over my wholesalers.
#14
Holy cow. Great job on the write up! Thanks for letting me know there's NO WAY I am going to even think about upgrading the amp! LOL.. You have much more patience than I do! Looking forward to hearing about the results. Let us know how many total hours It took!
#15
Driver School Candidate
Join Date: Nov 2013
Location: United Kingdon
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
In all fairness this look like maximum 3-4 hours work? I dont think it will take long as long as you got everything ready to work with and you have some experience with doing these things before.