Notices
LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

Lexus Link (Error msg)

Old Oct 26, 2008 | 07:44 PM
  #31  
Nauticalx's Avatar
Nauticalx
Instructor
 
Joined: Jul 2005
Posts: 1,023
Likes: 14
From: GA
Default

^^^^^Bump that. I bet there is a line going into the amp from the lexus link which overrides the audio and plays that error sound clip. We need to clip that wire somehow. It must be a similar setup to how the navigation system plugs into the amp to override the drivers speaker in order for the navi commands to be heard.
Reply
Old Oct 26, 2008 | 09:00 PM
  #32  
Shilly's Avatar
Shilly
Driver School Candidate
 
Joined: Sep 2008
Posts: 22
Likes: 0
From: Colorado
Default

Mine still says active when I start my 01 LS430. I have been looking at this issue since I got my car. At the dealer in Colorado springs, when I started the car, it stated there was an error, but since I brought it to Castle Rock, CO - It states that it is active every time. The Error message may be because the cell company servicing the old analog Lexus Link System is probably turning off their analog cell system network in certain areas - the same reason that they discontinued the old Lexus Link System. I received a quote for $150+ (with no cap from Kuni in Littleton CO) and decided to try to find another - cheaper - solution. I have bought the electrical manual and the service manuals on disc for the 2001 - which are NO help. The only thing I did find from an internet search was that there are supposed to be a male and female plug into the Lexus Link that can be joined to by-pass the Lexus Link unit and the system. There also seems to be a plug in the overhead that can be unplugged - labeled MAYDAY system. I have not verified the rear plug issue, but if the weather is nice over the next few weekends, I hope to get time to test this idea.

I really cannot believe that it is this hard to find a solution to this problem, and the complete lack of information on these systems. I also think it is awfully short sited for Lexus to discontinue their deactivation program. I am glad to find this thread, though. I saw in the diagrams where the unit was, but the picture earlier in the thread seems to help narrow down where it is and how to get to it. Hopefully more information to follow. Shilly
Reply
Old Oct 30, 2008 | 07:56 AM
  #33  
Bdragon007's Avatar
Bdragon007
Pole Position
 
Joined: Apr 2001
Posts: 349
Likes: 0
From: Massachusetts
Default

If you guys are like me and doesn't use the voice command (mine suck and never work right anyway), you can easily solve this.

In the trunk on the right hand side, lift up the cover where you access the Navigation drive. Next to the Nav drive you will see a silver box, there are two white plugs facing the back of the car. What you want to do is unplug the one on the right, that should take car of the annoying messages. If you guys have trouble let me know and I will try to take picture, good luck.
Reply
Old Oct 30, 2008 | 08:08 AM
  #34  
Nauticalx's Avatar
Nauticalx
Instructor
 
Joined: Jul 2005
Posts: 1,023
Likes: 14
From: GA
Default

Yes, please take a pic. What year is your LS? Also, did this disable your voice recorder functionality?
Reply
Old Oct 30, 2008 | 08:36 AM
  #35  
Bdragon007's Avatar
Bdragon007
Pole Position
 
Joined: Apr 2001
Posts: 349
Likes: 0
From: Massachusetts
Default

Wow that was quick, did you try and have trouble already? and Yes it will disable the voice recorder, samething if you got it done with the dealer.
Oh and mine is a 2001
Reply
Old Oct 30, 2008 | 10:07 AM
  #36  
blacksc400's Avatar
blacksc400
Car Chat Moderator
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (4)
 
Joined: Jan 2003
Posts: 10,146
Likes: 2
From: Las Vegas!
Default

Guess what, it's happens to me now!
Gd I hate that voice.
Reply
Old Oct 30, 2008 | 10:21 AM
  #37  
Bdragon007's Avatar
Bdragon007
Pole Position
 
Joined: Apr 2001
Posts: 349
Likes: 0
From: Massachusetts
Default

I know what you mean, it ALMOST made me hate my car
Reply
Old Dec 18, 2008 | 08:52 PM
  #38  
piggieback's Avatar
piggieback
Driver
 
Joined: Jan 2007
Posts: 123
Likes: 0
From: il
Default

Originally Posted by Bdragon007
If you guys are like me and doesn't use the voice command (mine suck and never work right anyway), you can easily solve this.

In the trunk on the right hand side, lift up the cover where you access the Navigation drive. Next to the Nav drive you will see a silver box, there are two white plugs facing the back of the car. What you want to do is unplug the one on the right, that should take car of the annoying messages. If you guys have trouble let me know and I will try to take picture, good luck.
Is there still a pause when you start the car, for example if a CD or radio is playing the voice would dominate that?.
Reply
Old Dec 20, 2008 | 07:10 PM
  #39  
Bdragon007's Avatar
Bdragon007
Pole Position
 
Joined: Apr 2001
Posts: 349
Likes: 0
From: Massachusetts
Default

no pause, no annoying voices
Reply
Old Dec 21, 2008 | 05:56 AM
  #40  
piggieback's Avatar
piggieback
Driver
 
Joined: Jan 2007
Posts: 123
Likes: 0
From: il
Default

Originally Posted by Bdragon007
no pause, no annoying voices
Thanks, I will do this "mod"
Reply
Old Dec 21, 2008 | 07:53 PM
  #41  
big_blzr94's Avatar
big_blzr94
Rookie
 
Joined: Aug 2008
Posts: 69
Likes: 0
From: ca
Default

did it and works great thank you
Reply
Old Jan 3, 2009 | 11:35 PM
  #42  
big_blzr94's Avatar
big_blzr94
Rookie
 
Joined: Aug 2008
Posts: 69
Likes: 0
From: ca
Default

just noticed with the connector off there is no sound from left rear speaker
Reply
Old Jan 5, 2009 | 09:40 AM
  #43  
Bdragon007's Avatar
Bdragon007
Pole Position
 
Joined: Apr 2001
Posts: 349
Likes: 0
From: Massachusetts
Default

Originally Posted by big_blzr94
just noticed with the connector off there is no sound from left rear speaker
There a way to fix that, but it's a little harder to explain. It's best to show and explain with picture. Well, I'll try anyway since I don't know when I will be able to take the pics.

There are 2 white plugs where you just unplug it the homelink connector. Unplug the other connector as well and plug them all back but not with their original plug. Think of it like you x crossed the connectors. This will get rid of the Message errors and keep everything work properly. Good luck!
Reply
Old Jan 5, 2009 | 09:48 AM
  #44  
intermec's Avatar
intermec
Advanced
15 Year Member
Photogenic
Liked
Loved
 
Joined: Oct 2008
Posts: 503
Likes: 54
From: wa
Default

what years did lexus offer the link feature?

is it an add on feature?
Reply
Old Jan 5, 2009 | 09:04 PM
  #45  
big_blzr94's Avatar
big_blzr94
Rookie
 
Joined: Aug 2008
Posts: 69
Likes: 0
From: ca
Default

Originally Posted by Bdragon007
There a way to fix that, but it's a little harder to explain. It's best to show and explain with picture. Well, I'll try anyway since I don't know when I will be able to take the pics.

There are 2 white plugs where you just unplug it the homelink connector. Unplug the other connector as well and plug them all back but not with their original plug. Think of it like you x crossed the connectors. This will get rid of the Message errors and keep everything work properly. Good luck!
are you saying to just cross the connectors and that will work? no other issues with that? I will give it a try in the morning.
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:48 PM.