00 LS400 bad power steering high pressure line
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2017
Location: California
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
00 LS400 bad power steering high pressure line
I have a 00 LS400 first the power steering sensor got messed up. So than I just tapped it and weld it and no more leaking. After that a week later I’m realizing my high pressure line is leaking from the rubber connection. What do you guys recommend on doing. Can you please help me thank you..
#3
Driver School Candidate
Thread Starter
Join Date: Jul 2017
Location: California
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
#4
try emailing info@3SX.com
I looked but do not see their LS400 listing anymore, but I just bought mine last April. I'm sure they still have the thread pitch and measurements so they can probably just make one.
I looked but do not see their LS400 listing anymore, but I just bought mine last April. I'm sure they still have the thread pitch and measurements so they can probably just make one.
#6
yeah it was pretty easy, it is supplied with new fittings to come out of the pump and rack. the OEM pump fitting you have to pull off was a bit of a pain because of the lack of space and you need a fairly large wrench on it.
I unbolted the ABS so I could push it aside a bit more and that helped.
I unbolted the ABS so I could push it aside a bit more and that helped.
#7
Driver School Candidate
Thread Starter
Join Date: Jul 2017
Location: California
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Iv tried looking up videos or pic on how to replace but no luck. Iv been having power steering problems. First if was my ivac control than I tapped it now this
Trending Topics
#8
Bluemagic, that is a nice looking hose replacement . I have some of those poly rack mounts (in your photo) as well. But mine got noisy after the grease wore off.
Here is another old PS repair post that I found while I was doing research for my repair. It includes a 2009 photo of his impossibly clean looking alternator.
https://www.clublexus.com/forums/ls-...ystem-diy.html
Here is another old PS repair post that I found while I was doing research for my repair. It includes a 2009 photo of his impossibly clean looking alternator.
https://www.clublexus.com/forums/ls-...ystem-diy.html
Thread
Thread Starter
Forum
Replies
Last Post
MattLS400
LS - 1st and 2nd Gen (1990-2000)
7
10-15-13 07:34 AM
enterconne
ES - 1st to 4th Gen (1990-2006)
7
02-15-12 04:30 AM