LS400 90 water temp sensor problem
#1
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
LS400 90 water temp sensor problem
I ordered a new after market water temp sensor. when i got it removed from engine, the sensor is different. teh after market is smaller and can not be fitted into the hole.
I contacted seller, they claimed they have checked with 3 sources and the item they sent to me was exactly for my car model.
can anyone pls help to provide OEM specs e.g. diameter, length etc of the original one?
here is the pic of they sitting together. new one is after market. the signal wire plug fits in perfectly.
I contacted seller, they claimed they have checked with 3 sources and the item they sent to me was exactly for my car model.
can anyone pls help to provide OEM specs e.g. diameter, length etc of the original one?
here is the pic of they sitting together. new one is after market. the signal wire plug fits in perfectly.
#3
Lexus Champion
correct Toyota part number is 89422-20010
and by the way, that new one does not look like any year model of LS400 water temp sensor!
the seller is completely incorrect
and by the way, that new one does not look like any year model of LS400 water temp sensor!
the seller is completely incorrect
Last edited by LScowboyLS; 01-20-14 at 07:20 PM.
#6
Lexus Champion
this link is cheapest I have seen for real genuine Toyota sensor --- I bet he will ship to Vietnam if you ask him
Trending Topics
#8
Lexus Champion
#10
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
Thanks LScowboyLS, I am working this out with seller first. by the way, I search the part no you gave me and found many. not going to buy non OEM again but I dont know for sure what the measurements means in this image
does it specifiy the length and diameter of the sensor?
does it specifiy the length and diameter of the sensor?
#11
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
#12
Pole Position
Thread Starter
Join Date: Nov 2007
Location: VN
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
#13
Lexus Champion
#14
Driver School Candidate
Join Date: Feb 2013
Location: Oregon
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys The two wire sensor is for ECU the other one has just one wire ; It is for the Gauge on dash . They are right next to each other in Water bridge ... I got the two wire from True Blue Auto parts online It is Beck/Arnley
$ 23.00 and some cents with free shipping Good service.
$ 23.00 and some cents with free shipping Good service.
#15
Lead Lap
iTrader: (2)
if you must go aftermarket - this is the cheapest one I would use