Update on my UCF10
#1
Pole Position
Thread Starter
Update on my UCF10
Installed Megan Street LPs last weekend. Liked them a lot on my previous UCF20 and got them again for my UCF10. I had my Veilside Andrew Racing 5s just chilling at home and put them on shortly thereafter. They look good but the fronts are not meaty enough (tire-wise).
Before and after Megans (not maxed in rear)
Local meet < Dirty South Meets >
Local car blog < STANCE|CULTURE >
Here are my specs
Wheels (Tires)
FR: 18x10 ET36 (235/40/18)
RR: 18x12 ET48 (275/40/18) Fit without rolling/pulling or removing black fender trim piece.
I want to upgrade the front tire size because they're currently stretched, too narrow and it's not really my cup of tea. I want 255/40s in front so I can have more meat and I'll be able to raise the front up just a hair so it rakes less. I want it to be more everyday functional and less Cali-stanced (if that's even the correct term). I'd also want to cut into my strut towers to have more clearance for the UCA. Little things like that. I also need to resolve my lifter tick, it's rather minor though. Body needs a bit of love, especially bumpers because the paint is cracking on them and I have a tiny bit of rust in my passenger rear quarter. Overall, I'm super stoked about it and this winter, it goes in for a 5spd swap.. Looking forward to it! Any input or suggestions on my build are completely welcome and I look forward to hearing from you! PM me if you have some interesting/spare parts!
Thanks,
Renato
Before and after Megans (not maxed in rear)
Local meet < Dirty South Meets >
Local car blog < STANCE|CULTURE >
Here are my specs
Wheels (Tires)
FR: 18x10 ET36 (235/40/18)
RR: 18x12 ET48 (275/40/18) Fit without rolling/pulling or removing black fender trim piece.
I want to upgrade the front tire size because they're currently stretched, too narrow and it's not really my cup of tea. I want 255/40s in front so I can have more meat and I'll be able to raise the front up just a hair so it rakes less. I want it to be more everyday functional and less Cali-stanced (if that's even the correct term). I'd also want to cut into my strut towers to have more clearance for the UCA. Little things like that. I also need to resolve my lifter tick, it's rather minor though. Body needs a bit of love, especially bumpers because the paint is cracking on them and I have a tiny bit of rust in my passenger rear quarter. Overall, I'm super stoked about it and this winter, it goes in for a 5spd swap.. Looking forward to it! Any input or suggestions on my build are completely welcome and I look forward to hearing from you! PM me if you have some interesting/spare parts!
Thanks,
Renato
Last edited by renato902; 04-02-13 at 09:25 AM.
#5
Pole Position
Thread Starter
Headlight washers
I prefer without the center caps, they're also super duper rare to find!
YES!! I know, I've been poking around for one.. If you find something PM me
I prefer without the center caps, they're also super duper rare to find!
YES!! I know, I've been poking around for one.. If you find something PM me
Trending Topics
#8
Pole Position
Thread Starter
If your car is white, I'd gladly trade your front bumper for mine (mine's paint is cracking a bit on the top portion and theres a blemish on the bottom passenger side but overall, looks good). Let me know!
Thread
Thread Starter
Forum
Replies
Last Post
DETUNED
Wheels and Tires Classifieds
8
08-01-04 09:44 PM