I adjusted the steering wheel with the **** on the side and it moved but made a clicking sound. When i started driving the steering wheel was off to the right really bad . The next day i tryed to adjust it again and it clicked again now the steering wheel just goes round and round and the wheels dont move !!! I checked uder the car first at the rack pinion . 2nd i removed the cover behind the steering wheel and followed the movement down as i turned the wheel from side to side .the part that moves in and out when adjusting , it is turning when it goes inside of it then into a housing and is not turning when it comes out . What should i do next ?? I have a 92 ls400 . I would like to thank everyone for the great information and help !!!!!! I would not have went this far if i had not found this site and all of you !!!!!!!!!

 

guess ur i the same boat as me havent fixed the issue but have been told by many...inner tie rods...check to see if there damged...mine were

 

but the column stops turning befor it make it out of the car