Pictures of 20's on the LS400
#17
Lexus Test Driver
Here's my old UCF10 on 20x8.5 dropped on Tanabe DF210's. Never rubbed and could turn fully either direction. tires were........225/35 i believe. +35 and not staggered.
#18
Lead Lap
Thread Starter
iTrader: (2)
Join Date: Jun 2007
Location: Georgia
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Wow-thanks for all of the responses guys!
This is still up in the air for me, but judging by some of these pictures, I might be able to swing it. Although it is not the exact look I had originally set out for, I believe I can step up from these wheels at a later time.
My car will be lowered on Megan Racing coils, as for the finish, they were almost like a brushed look, and not chrome.
Thanks everyone, I'll keep you guys updated!
This is still up in the air for me, but judging by some of these pictures, I might be able to swing it. Although it is not the exact look I had originally set out for, I believe I can step up from these wheels at a later time.
My car will be lowered on Megan Racing coils, as for the finish, they were almost like a brushed look, and not chrome.
Thanks everyone, I'll keep you guys updated!
#19
Yeah, 93-94 models came with them from the factory. That's how you can tell what years are what when looking at a 1gen LS. If you plan on upgrading, you'll need all the door claddings, front panel that goes on the fenders, and the rear dog legs, and also the side skirts.... looks much better, and cleaner....
#25
#27
Driver School Candidate
Join Date: Dec 2008
Location: CA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
#29
#30