nitto1320

Before i order a strut bar on this site http://www.modacar.com/products/Toyota/Supra/MODASTB/

i wanna make sure it will fit, if i order a toyota supra strut bar from a 93-97 supra i heard it will fit a 96 lexus LS400 with some added washers, i just want some feedback from you guys to make sure it would work and fit properly before i order it thanks guys.

shaned1320

hmmm i wonder if a strut bar would improve handling on the LS400? or just for looks.

PureDrifter

iTrader: (10)

yea, you will need a few spacers or better yet, bend the bar enough to clear.

it does make a slight difference, it tightens up the front end and makes it a bit less boat-like

1995LS400

Pure, what year Supra bar kinda fits the 95' UCF-20? I did this with my old 91' Acura Legend and a Honda Prelude bar fit with spacers like you were saying.

PureDrifter

iTrader: (10)

1993-1998 MKIV Supra TURBO

MUST be a turbo!!

1995LS400

^Now, do they have the cheapy ones on ebay?

PureDrifter

iTrader: (10)

yea, you can get some cheap mkiv TT bars for <$30 >.>

steveski

Price is really cheap compared to the Tom's I bought for over $300

The bar tightened my front end up nicely.

Nano-V8

this also applies for the 1gen LS too right? so this is true. the supra TURBO strut bar does fit the LS.

damon

What is the correct install procedure for a strut bar?

Should the suspension be airborne for install or done with car on the ground w full vehicle weight on the suspension?

shonn

iTrader: (1)

Doesn't "WIN" make a strut bar for the LS? And a couple other companies if i'm not mistaken.

PureDrifter

iTrader: (10)

yea, but at $300+, they are overpriced. on top of that, most of those are 1pc designs, which don't allow you to put any preload on the bar.

PureDrifter

iTrader: (10)

for a 3pc bar, install while on the ground, jack car up from center crossmember, and tighten the center nuts (for the middle piece that goes across) as much as you can without stripping the bolts.

for 1pc you can put it on either up or down, wont make much of a difference. down is easier.

PureDrifter

iTrader: (10)

i think so, but i dont think you need spacers for the 1st gen.

search on it.

shaned1320

Pure, where in the hell do you get that mkiv strut bar for $30? lol