Post up Recent pixs of YOUR car (LS400s)
#3168
Driver School Candidate
Join Date: Feb 2009
Location: WA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
dammmm -18. im running 19x9.5 and 19x10 +22 all around but I didnt do any major body pull, just rolled. forgot to ask how much camber?
#3171
My apologies, I thought KevinE's question was just in general not pertaining to my car directly. You definitely will not fit these specs in either a 10/11 or a 20/21 without body work or a lot of camber. Here is how they fit prior to body work.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
#3172
Driver School Candidate
Join Date: Feb 2009
Location: WA
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
My apologies, I thought KevinE's question was just in general not pertaining to my car directly. You definitely will not fit these specs in either a 10/11 or a 20/21 without body work or a lot of camber. Here is how they fit prior to body work.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
#3173
Lexus Test Driver
Join Date: Sep 2006
Location: unķńōwŋ .. Lªst seen in sgv
Posts: 808
Likes: 0
Received 2 Likes
on
2 Posts
My apologies, I thought KevinE's question was just in general not pertaining to my car directly. You definitely will not fit these specs in either a 10/11 or a 20/21 without body work or a lot of camber. Here is how they fit prior to body work.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
Different wheels but specs are almost identical except the current wheels are 5mm more aggressive all around.
#3174
I'm local to you that's why I asked with regards to the car.
#3175
lol, just a lightweight in this game. Anyways, sorry for the crappy pics my cams been broken for a while so I had to use my brothers cell phone to snap these after I picked him up early this morning.
Still got a ways to go from what I would consider a finished project...
- Back feels like it could drop another 1" or 1/2".
- Eagle Eyes are gonna be retrofitted soon with some FX35 projectors.
- I'm gonna see about changing the mufflers to something with a larger canister for a deeper tone. Might just save and get those damn 5Zigens LOL!
- Rust work and repaint, cause some is starting to appear where the fenders and bumpers meet. I'll probably pull the fenders sometime before, just to be safe and save time.
Last edited by AerialAce; 09-02-11 at 03:00 AM.
#3177
Was considering making my own, I remember the pics you posted showing the end result of yours. What degree did you cut the tips to get the correct slant? I could easily get two SS Magnaflow canisters and some long tips for close to nothing and get this done quickly.
#3179
My connect wants to do my Eagles tomorrow and give them back Monday since I got those two days off, I'll try to take some better pics when I get them installed cause the ones I posted don't quite do the car justice lol.