LS400 Demon Eye Group Buy Proposal
08-25-05, 09:05 AM
#17
Pole Position
Join Date: Jul 2002
Location: Relocated from NO to ATL
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sha4000
so lets get this going guys
How many 98-00 LS owners would be interested? If we get enough on board the pricing for the first run can go as low as the GS or IS300 kits.
08-25-05, 05:53 PM
#21
Driver
Thread Starter
Join Date: Mar 2003
Location: International
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
It would be good if someone like DEPO or APC could make something for the LS given that they are sooo popular! 
It would probably be cheaper to make a whole new assembly provided we get the gen 1 numbers. I've heard that companies will do a 50-100 limited run!
The other option is get Hiltop in Japan to convert our lenses to diamond cut (See pic).
Let's make it happen!!!
It would probably be cheaper to make a whole new assembly provided we get the gen 1 numbers. I've heard that companies will do a 50-100 limited run!
The other option is get Hiltop in Japan to convert our lenses to diamond cut (See pic).
Let's make it happen!!!
08-26-05, 10:29 AM
#23
Driver
Join Date: Sep 2003
Location: Illinois
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by psls400
It would be good if someone like DEPO or APC could make something for the LS given that they are sooo popular!
It would probably be cheaper to make a whole new assembly provided we get the gen 1 numbers. I've heard that companies will do a 50-100 limited run!
The other option is get Hiltop in Japan to convert our lenses to diamond cut (See pic).
Let's make it happen!!!
It would probably be cheaper to make a whole new assembly provided we get the gen 1 numbers. I've heard that companies will do a 50-100 limited run!
The other option is get Hiltop in Japan to convert our lenses to diamond cut (See pic).
Let's make it happen!!!
Quoted email:
Could you please send us a picture of your headlamps. If I member right, the first generation LS has a fluted lens design which would need to be cleared out if we were to do any type or retrofit. You actually have lots of options available to you since your headlamps are so big.
Our phase 2 base price is $800 and our phase 3 base price is $1000. The angel eyes is an additional $400. Our most expensive setup would probably be the "gatling gun" setup. That particular setup cost $1700.
08-26-05, 10:38 AM
#24
Lead Lap
Join Date: Jan 2005
Location: Missouri
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
What is a phase 2 or phase 3? I wonder what kinda of numbers we would be looking at for just the cleared out headlights. Is it possible to see if any glass work companies could clear our lenses? But the one in the picture above is the JDM headlight, 1-piece, and i bet it would cost a few hundred just to buy a JDM one. Because even if i did have a company clear out my lenses for a cheaper price i would want to buy a JDM one and have them do it on that. I hope on a group buy for just the clear JDM headlights we might be able to do it. We need to get some numbers or something. It would really make the first gen look a LOT different.
08-26-05, 10:55 AM
#25
Forum Administrator
iTrader: (2)
Originally Posted by mtsao
I checked with www.Illusion-Lighting.com a couple of years ago and here's the response i got back, fwiw. It was way more than I was willing to spend...and it's still too much...but maybe the price has come down and/or a group buy can bring it down...
Quoted email:
Could you please send us a picture of your headlamps. If I member right, the first generation LS has a fluted lens design which would need to be cleared out if we were to do any type or retrofit. You actually have lots of options available to you since your headlamps are so big.
Our phase 2 base price is $800 and our phase 3 base price is $1000. The angel eyes is an additional $400. Our most expensive setup would probably be the "gatling gun" setup. That particular setup cost $1700.
Quoted email:
Could you please send us a picture of your headlamps. If I member right, the first generation LS has a fluted lens design which would need to be cleared out if we were to do any type or retrofit. You actually have lots of options available to you since your headlamps are so big.
Our phase 2 base price is $800 and our phase 3 base price is $1000. The angel eyes is an additional $400. Our most expensive setup would probably be the "gatling gun" setup. That particular setup cost $1700.
08-29-05, 07:21 AM
#26
Driver
Join Date: Sep 2003
Location: Illinois
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DaveGS4
Guys please remember that only vendors that help support CL and keep it up and running (like LCA575 / AAC) can offer GBs on our forum.
...just trying to share what I had learned.
