Notices
LS - 1st and 2nd Gen (1990-2000) Discussion topics related to the 1990 - 2000 Lexus LS400

Electrical Problems

Old Jul 7, 2005 | 06:15 PM
  #1  
t-mac's Avatar
t-mac
Thread Starter
Driver School Candidate
 
Joined: Jul 2005
Posts: 2
Likes: 0
From: TN
Default Electrical Problems

I just recently bought a 97 LS400. The car looks and rides great. Earlier today i took it to a shop to have it detailed inside and out and they also cleaned the engine. Well when I picked it up and started driving the check light and trac control light blinks and my car seems like it misses. it has a vibration to it now when it idles and sometimes when I accelerate. the guys at the shop had to have gotten something wet to cause this to happen. I don't know a whole lot about engines but my guess is they got a plug or some type of sensor wet. Has this happened to anyone else?
Reply
Old Jul 8, 2005 | 03:21 AM
  #2  
phillipin's Avatar
phillipin
Driver
 
Joined: Jun 2005
Posts: 159
Likes: 0
From: rogersville, tn
Default

well if they cleaned your engine bay they either used water or a steamer, it possible they wet some of your sensor or sensor connections, its also possible they got water into the valve cover area. If you can just let your motor idle for 10-15 minutes and see if it burns off te water. If not what ever they did might have fried from electronics. Take it back, complain and scream if you must. bring in a written letter stating the damages you found after they touched your lexus. In the letter give them 15 days to recitfy the issue and give a penalty of post 15 days if they havent made an attempt to get a 3rd party mechanic involved that you will sue them for any liable damages. Typically this will scare companies into fixing it with no hassel.
Reply
Old Jul 8, 2005 | 09:16 AM
  #3  
GRAND_LS 4's Avatar
GRAND_LS 4
3UZ-FEEEE
iTrader: (2)
 
Joined: May 2004
Posts: 6,253
Likes: 20
From: Northern VA
Default

Take it to a nearby autozone, and they will read the code for free. Then report back here with the code, and we might be able to help you.
Reply
Old Jul 13, 2005 | 08:23 PM
  #4  
hanuman's Avatar
hanuman
Rookie
 
Joined: Jul 2005
Posts: 87
Likes: 0
From: IN
Default

i had the same problem when i pressure washed my engine. what has happened is water has got into your spark plug area and the engine is missfiring due to the water. you have to take the valve covers off and dry off the plugs and wires. you will be back into business.
Reply
Old Jul 13, 2005 | 08:40 PM
  #5  
phillipin's Avatar
phillipin
Driver
 
Joined: Jun 2005
Posts: 159
Likes: 0
From: rogersville, tn
Default

FYI people, autozone no longer reads codes because they got a class action law suit because they were reading peoples codes telling them they need to replace this or that and then sold them something that wasnt broken to begin with. they do not check codes anymore i went to 4 autozones and 2 kragens this past week
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BTC89LS400
LS - 3rd Gen (2001-2006)
3
Dec 20, 2017 03:36 AM
Moarpower
LS - 1st and 2nd Gen (1990-2000)
34
Sep 21, 2017 04:23 PM
lex2001
ES - 1st to 6th Gen (1990-2018)
2
Oct 21, 2010 11:01 AM
ekrebs
SC - 1st Gen (1992-2000)
1
Mar 13, 2008 12:33 AM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 10:02 AM.