removing the dome light
Thread Starter
Driver School Candidate
Joined: Mar 2003
Posts: 15
Likes: 0
From: Michigan
removing the dome light
The bulb in my dome light is burned out so i tried to get it out, but i cant seem to figure out how i remove the unit to get at the bulb. Any help would be greatly appreciated.
Pole Position
Joined: Mar 2002
Posts: 270
Likes: 1
From: New Jersey
to just replace the bulb you just pop the plastic lens off and take the bulb out. you sorta have to use a thin flat head or something to wedge in there to pop it out. there are clips on all 4 sides so it's in there pretty good just need some force applied
Lexus Fanatic
Joined: Feb 2001
Posts: 6,879
Likes: 4
From: Kaliforniastan
Go to professional auto paint shop (or maybe home depot has 'em) and get a plastic bondo spreader and use that....screwdrivers can leave a nasty gouge in the plastic housing (around the lens)
It's kind of a pain to get out but not impossible...just be gentle...
It's kind of a pain to get out but not impossible...just be gentle...
Thread
Thread Starter
Forum
Replies
Last Post
