Notices
Lighting A place to ask questions about HIDs & other Lexus lights
Sponsored by:
Sponsored by: CARiD

Tryk's new LED work(climate and radio)

Thread Tools
 
Search this Thread
 
Old May 7, 2005 | 05:11 AM
  #1  
Tryk's Avatar
Tryk
Thread Starter
Pole Position
 
Joined: Nov 2002
Posts: 289
Likes: 0
From: Canada
Default Tryk's new LED work(climate and radio)

Well I finally tackled the climate control and radio to make them match my dash lighting. I am very happy with the results. The only possible problem is that the buttons on the climate control might be a little too bright. haha.
In the pictures the climate and radio displays might look alot different in color, but the same led's were used and in person they look like almost a perfect match... just the climate is a tad brighter so it shows up lighter in the pics. The radio was very tricky to do all the white led's, as there is not enough room for the led's and resistors in the stock bulb locations...but I figured out a couple little tricks
So all together I now have 16 led's in the climate control, and 22 in the radio. I will be adding a few more in the radio at the very bottom when I have time.

I would like to say a big thanks to THE man, Brian. If he didn't lead the way with SC lighting I would have never attempted most of the led projects in my car.

ok here is a before picture...of my blotchy red climate display



And here is the new and improved climate control unit!



The new and improved stereo unit!



Here are a couple pictures of both together...



Reply
Old May 7, 2005 | 05:51 AM
  #2  
Aristo300's Avatar
Aristo300
Lexus Test Driver
 
Joined: Apr 2005
Posts: 1,510
Likes: 2
From: South Walton County, FL
Default

Those looks great.. I'm might have to add to the mod list!
Reply
Old May 7, 2005 | 10:25 AM
  #3  
dinh626's Avatar
dinh626
Pole Position
 
Joined: Mar 2004
Posts: 287
Likes: 1
From: Canada
Default

Looking good jared, makes me wanna come down to s'toon so you can do mine for me
Reply
Old May 7, 2005 | 10:34 AM
  #4  
setwire's Avatar
setwire
Pole Position
 
Joined: Dec 2003
Posts: 200
Likes: 0
From: Canada
Default New Improved Climate and Radio

jared
Your climate and radio displays look fantastic.

What did you use on you climate and radio to get the light so even? LED's ? if so what type?
Cold Cathodes? If so what length ?

Rob
Reply
Old May 7, 2005 | 12:01 PM
  #5  
96sc3's Avatar
96sc3
Lead Lap
iTrader: (1)
 
Joined: Dec 2003
Posts: 724
Likes: 1
From: New York
Default

so that means this is a DIY~!~!
Reply
Old May 7, 2005 | 12:20 PM
  #6  
laxdude362's Avatar
laxdude362
Lexus Test Driver
iTrader: (1)
 
Joined: Jul 2004
Posts: 1,097
Likes: 1
From: Tennessee
Default

oooooo pretty

Very nice job!! Looks great
Reply
Old May 7, 2005 | 12:34 PM
  #7  
Tryk's Avatar
Tryk
Thread Starter
Pole Position
 
Joined: Nov 2002
Posts: 289
Likes: 0
From: Canada
Default

Originally Posted by setwire
jared
Your climate and radio displays look fantastic.

What did you use on you climate and radio to get the light so even? LED's ? if so what type?
Cold Cathodes? If so what length ?

Rob
Rob yes I used LED's! Finally figured out a way to get the lighting almost perfectly even.
Reply
Old May 7, 2005 | 12:38 PM
  #8  
Tryk's Avatar
Tryk
Thread Starter
Pole Position
 
Joined: Nov 2002
Posts: 289
Likes: 0
From: Canada
Default

Originally Posted by 96sc3
so that means this is a DIY~!~!
everything is DIY for me Absolutely no one touches my car except for myself.
Reply
Old May 7, 2005 | 12:50 PM
  #9  
mrcrx28's Avatar
mrcrx28
Driver
 
Joined: May 2004
Posts: 131
Likes: 0
From: Illinois
Default

Looks fabolous. Any way of getting a write up?? ehehehheh, cause i tried to use LED's before too. But it was very dim and it would not light up anything. What kind of LED's did you use? Thanks
Reply
Old May 7, 2005 | 01:06 PM
  #10  
ki_soarer's Avatar
ki_soarer
Lexus Champion
 
Joined: Aug 2003
Posts: 3,255
Likes: 2
From: Maryland
Default

looks great. big improvement. i relly like how you changed the color arround the key hole too. your right though, its a bit bright on the climate control.
Reply
Old May 7, 2005 | 03:04 PM
  #11  
96sc3's Avatar
96sc3
Lead Lap
iTrader: (1)
 
Joined: Dec 2003
Posts: 724
Likes: 1
From: New York
Default

where did you get them lights or cathodes or what not,,,?
Reply
Old May 7, 2005 | 03:33 PM
  #12  
Tryk's Avatar
Tryk
Thread Starter
Pole Position
 
Joined: Nov 2002
Posts: 289
Likes: 0
From: Canada
Default

Originally Posted by 96sc3
where did you get them lights or cathodes or what not,,,?
Everything is LED's. I buy all my led's on ebay. I buy all my resistors at a local electronics shop.
Reply
Old May 7, 2005 | 04:08 PM
  #13  
O. L. T.'s Avatar
O. L. T.
Keeper of the light
20 Year Member
Liked
Loved
Community Favorite
iTrader: (17)
 
Joined: Feb 2003
Posts: 34,122
Likes: 485
From: My little world
Default

Looks good bro Can you post a pic without so much contrast blown out? Those halo's around everything mean the pic makes it look WAY too bright. I made that mistake when i first started building units.

I was trying to get a look at it by reducing the contrast, but the halo is in the picture itself. I'm trying to see the work
Reply
Old May 7, 2005 | 04:11 PM
  #14  
O. L. T.'s Avatar
O. L. T.
Keeper of the light
20 Year Member
Liked
Loved
Community Favorite
iTrader: (17)
 
Joined: Feb 2003
Posts: 34,122
Likes: 485
From: My little world
Default

Here's an example of what i am talking about. Without so much contrast it is much easier to see the units light source. Makes for a cleaner pic .






Reply
Old May 7, 2005 | 04:15 PM
  #15  
LexusPunk's Avatar
LexusPunk
Pole Position
 
Joined: Aug 2003
Posts: 377
Likes: 0
From: Missouri
Default

i thought the radio buttons couldnt be changed? Do a writeup on the radio buttons would ya?
Reply



All times are GMT -7. The time now is 02:21 AM.