CAN-Other 1000whp sc300 na-t
07-29-10, 08:00 PM
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: michigan
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
1000whp sc300 na-t $14500
92 lexus sc300 Turbo
Car + exterior + general
- 18" Wheels + tires
- 15x10 and 15x4 welds draglite rims
- 28x11.5x15 mickey thompson ET streets and 28x6x15 mickey thompson skinnies
- blue tokico Suspension
- LS 400 big brake upgrade
- Electric fan
- Power steering relocation kit
- Battery relocation kit
- Thick Aluminum radiator
- working A/C
- All electrical working, power windows, seats and sun roof
- 1997 tail lights
Engine
- 2JZGE non turbo engine
- 2mm Cometic Head gasket
- Arp Head studs
- 272 crower camshafts
- supertech dual valve springs
- Fidanza adjustable camgears
- TT valve covers custom for -10 fittings for catch can
Drive train
- Supra turbo 5 speed tranny R154
- Supra turbo front half (drive shaft)
- 1JZ Bell housing
- TILTON TRIPPLE PLATE CLUTCH SETUP $3000 + by itself
- Tilton flywheel
- Supra TT auto LSD
Turbo kit
- Garrett GT4202 With T4 housing
- 50mm Wastegate
- TIAL BOV
- 3/4" Oil return line
- -4 Oil feed
- Sandwich plate
- custom made catch can
Exhaust system
- dual 3" Magnaflow mufflers
- 4" straight thrugh Exhaust
- 4” Down pipe
- ebay tubular Manifold
- Exhaust wrap for manifold and down pipe
Intake system
- custom made Intake manifold
- 3" intercooler piping
- 4" thick Intercooler
- 5" Air filtrer + 5” intake pipe
- 4" ProEfi Throttle body
- Intake thermal gasket
- 100% methanol injection kit
Electronics
- AEM EMS
- AEM MAP
- AEM IAT
- AEM Wideband
- Resistor pack to run low impedance injectors
- Greddy profec b spec 2 Boost controller
- Oil pressure gauge
- Boost gauge
- Line lock
Fuel
- 1000cc Precision Injectors
- In tank 2 X Walbro 255
- -10 supply -8 return Fuel lines
- Fuel pressure regulator
- Custom -10 Fuel rail
Ignition
- LS1 coils
- Custom made 8.5mm spark plug wires made by me
Distributorless setup
- TT oil pump (for crank sensor)
- TT cog (for 12 tooth wheel (crank reference))
- TT cam sensor (custom braket made and welded on head)
- Custom cap to plug distributor hole
The car made last year 886whp and 714ft/lbs of torque at 28psi. this year i have a different wastegate with a larger spring to boost more and the valve springs so it can rev higher, the car should make 1000whp at less then 35psi.
TILTON TRIPPLE PLATE INSTALLED
$16000----> last price $14500
I am in windsor ontario
Car + exterior + general
- 18" Wheels + tires
- 15x10 and 15x4 welds draglite rims
- 28x11.5x15 mickey thompson ET streets and 28x6x15 mickey thompson skinnies
- blue tokico Suspension
- LS 400 big brake upgrade
- Electric fan
- Power steering relocation kit
- Battery relocation kit
- Thick Aluminum radiator
- working A/C
- All electrical working, power windows, seats and sun roof
- 1997 tail lights
Engine
- 2JZGE non turbo engine
- 2mm Cometic Head gasket
- Arp Head studs
- 272 crower camshafts
- supertech dual valve springs
- Fidanza adjustable camgears
- TT valve covers custom for -10 fittings for catch can
Drive train
- Supra turbo 5 speed tranny R154
- Supra turbo front half (drive shaft)
- 1JZ Bell housing
- TILTON TRIPPLE PLATE CLUTCH SETUP $3000 + by itself
- Tilton flywheel
- Supra TT auto LSD
Turbo kit
- Garrett GT4202 With T4 housing
- 50mm Wastegate
- TIAL BOV
- 3/4" Oil return line
- -4 Oil feed
- Sandwich plate
- custom made catch can
Exhaust system
- dual 3" Magnaflow mufflers
- 4" straight thrugh Exhaust
- 4” Down pipe
- ebay tubular Manifold
- Exhaust wrap for manifold and down pipe
Intake system
- custom made Intake manifold
- 3" intercooler piping
- 4" thick Intercooler
- 5" Air filtrer + 5” intake pipe
- 4" ProEfi Throttle body
- Intake thermal gasket
- 100% methanol injection kit
Electronics
- AEM EMS
- AEM MAP
- AEM IAT
- AEM Wideband
- Resistor pack to run low impedance injectors
- Greddy profec b spec 2 Boost controller
- Oil pressure gauge
- Boost gauge
- Line lock
Fuel
- 1000cc Precision Injectors
- In tank 2 X Walbro 255
- -10 supply -8 return Fuel lines
- Fuel pressure regulator
- Custom -10 Fuel rail
Ignition
- LS1 coils
- Custom made 8.5mm spark plug wires made by me
Distributorless setup
- TT oil pump (for crank sensor)
- TT cog (for 12 tooth wheel (crank reference))
- TT cam sensor (custom braket made and welded on head)
- Custom cap to plug distributor hole
The car made last year 886whp and 714ft/lbs of torque at 28psi. this year i have a different wastegate with a larger spring to boost more and the valve springs so it can rev higher, the car should make 1000whp at less then 35psi.
TILTON TRIPPLE PLATE INSTALLED
$16000----> last price $14500
I am in windsor ontario
Last edited by adam8103; 10-20-10 at 11:12 AM. Reason: change price
07-30-10, 12:25 PM
#7
Pole Position
Thread Starter
iTrader: (1)
Join Date: Oct 2007
Location: michigan
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
sorry if i said that in the thread, i am selling it and i gave the prices. i already sold stuff on here and bought parts from people as well.
i removed the water testing part
i removed the water testing part
