Nakamichi head unit (help!!!)
Thread Starter
Advanced
Joined: Jan 2009
Posts: 690
Likes: 25
From: South Austin, Texas
Nakamichi head unit (help!!!)
I took out the head unit to clean the display from the inside. When I put everything back now there is only sound in the front and not the back speakers. What did I do? How can I fix it. All the ribbons are securely connected to the circuit board. Please help.
Thread Starter
Advanced
Joined: Jan 2009
Posts: 690
Likes: 25
From: South Austin, Texas
Okay, I opened up the head unit and everything seemed fine, but this time I connected it to the harness with the side panel open giving me access to the circuit board/ribbon. I had to test to see why this was happening. The white ribbon is what controls the speakers and what speakers the music come from. I had to wiggle it to where all 5 speakers were playing then snapped it in to the circuit board. I have the 99 GS 300, nakamichi premium sound system. I thought I needed a whole new head unit but after taking it apart and putting back together a few times, it's back play crisp and loud! Hopefully this will help someone.
Yes, the display got cleaned from the inside.
Yes, the display got cleaned from the inside.
Thread
Thread Starter
Forum
Replies
Last Post
ramses974
Lexus Audio, Video, Security & Electronics
0
Aug 8, 2015 12:03 AM
jerryparks
Lexus Audio, Video, Security & Electronics
2
Oct 8, 2010 06:08 PM
