AVIC-D3 problems

Reply Subscribe

Thread Tools

Search this Thread

Dec 12, 2010 | 12:16 AM

SLowEvo

Thread Starter

Rookie

Joined: Jan 2010

Posts: 71

Likes: 0

From: Florida

AVIC-D3 problems

hey guys,

I bought this avic d3 from a member off the forums and I was kind of dicked on the deal. word of advice -never buy a indash system used with out playing with it first.

Long story short I got the d3 install professionally and the system didn't fully work.. I mean ipod works and the navi shows you where your are. but you cant enter address nor can you watch videos... period.. What I was wondering if anyone other can burn me a copy of the navi disc. The burnt copy I received with the unit might be the cause of the problems. Any help would be great ...

Thanks
tim

heres a clip of my navi issues..

http://www.youtube.com/watch?v=f08d1j5VCfM

Dec 12, 2010 | 04:29 AM

Roman71

Driver School Candidate

Joined: Dec 2010

Posts: 6

Likes: 0

From: Moscow

1 Connect a bench hammer wire on weight (minus) usually it it is light the green!

2 make reset!

Dec 12, 2010 | 07:17 AM

gadgeeets

Rookie

Joined: Mar 2007

Posts: 58

Likes: 0

From: De

I have 2 of the same radios in both my vehicles, and your issue is your headunit isn't hooked up properly.i see you was standing still and it still didn't work ..so either the bypass isn't correct or he didn't ground the parking brake wire. check this it it will help

http://avic411.com/index.php?/topic/...vic-d3-bypass/

Dec 12, 2010 | 07:37 AM

SLowEvo

Thread Starter

Rookie

Joined: Jan 2010

Posts: 71

Likes: 0

From: Florida

^ ya i watched the installer do this! he hacked it and it didnt work.. he put it back to normal and it didnt work.. idk what else it could be but i know for sure the wiring is right