I am installing a valet 554r remote start on my wife 1997 ES 300 after getting it all hooked up and pretty much taking what seems like half the car apart I think I might have a little problem?
Every thing seemed to be working fine until I tied in the parking light flash. Then after the car auto starts the display for the heater/AC and the radio flash from dim to bright? Here how I have it hooked up and hopefully somebody with far more knowledge than myself will bale me out.
my door unlock harness is set to positive and 1 of the wires from the alarm is tied into a red/w a green stripe and the other is tied into a blue/w a white stripe. and yes it lock and unlocks the doors when you hit the remote. Now on my main harness I have a wire that is a selectable light flash output, it is jumped to throw a positive output and I tied it into a Green/w a orange stripe. Oh by the way that wire was comming off of the fuse box in the front lower left corner and my lock wires where found on the drivers kick panal. now hopefully somebody can tell me where I am going wrong. If I disconnect the parking light flash I dont get the radio/heater flashing when the car auto starts???
hope somebody can help???
thanks