21" wheel weights
Advanced
Joined: Aug 2016
Posts: 595
Likes: 104
From: TX
100% agree and who would anyone need to know this,. Just buy your aftermarket wheels and enjoy the look.
Intermediate
Joined: Feb 2009
Posts: 263
Likes: 170
From: SG
Well, yes, I did. I actually posted this along with my new wheel setup in the wheels sticky thread but I suppose not a not of people noticed so I'll post it here as well, stock 21 wheel weights (as measured personally by me, without tires) and my aftermarket Work Schwert 21s for reference
Stock wheel weights:
Front: 15.2kg / 33.5lb
Rear: 16.0kg / 35.3lb
Work Schwert weights:
Front 14.2kg / 31.3lb
Rear 14.8kg / 32.6lb
Some context: Work make proper JDM wheels but among the best japanese wheel makers, they are on the heavier side. You can definitely get much lighter from brands like Volk and Advan, especially in forged 1 piece form. But given that the stock wheels are about 1kg away from good aftermarket wheels, I would consider their weights as not stellar, but better than I expected from a manufacturer
My main gripe with them is that their offsets are terrible (at least 20mm too conservative) and the design is somewhat polarising (although I personally don't mind them, despite not being in love with them)
Stock wheel weights:
Front: 15.2kg / 33.5lb
Rear: 16.0kg / 35.3lb
Work Schwert weights:
Front 14.2kg / 31.3lb
Rear 14.8kg / 32.6lb
Some context: Work make proper JDM wheels but among the best japanese wheel makers, they are on the heavier side. You can definitely get much lighter from brands like Volk and Advan, especially in forged 1 piece form. But given that the stock wheels are about 1kg away from good aftermarket wheels, I would consider their weights as not stellar, but better than I expected from a manufacturer
My main gripe with them is that their offsets are terrible (at least 20mm too conservative) and the design is somewhat polarising (although I personally don't mind them, despite not being in love with them)
Last edited by breplica; Jan 18, 2023 at 07:15 AM.
Instructor
Joined: Aug 2011
Posts: 919
Likes: 323
From: IN
Well, yes, I did. I actually posted this along with my new wheel setup in the wheels sticky thread but I suppose not a not of people noticed so I'll post it here as well, stock 21 wheel weights (as measured personally by me, without tires) and my aftermarket Work Schwert 21s for reference
Stock wheel weights:
Front: 15.2kg / 33.5lb
Rear: 16.0kg / 35.3lb
Work Schwert weights:
Front 14.2kg / 31.3lb
Rear 14.8kg / 32.6lb
Some context: Work make proper JDM wheels but among the best japanese wheel makers, they are on the heavier side. You can definitely get much lighter from brands like Volk and Advan, especially in forged 1 piece form. But given that the stock wheels are about 1kg away from good aftermarket wheels, I would consider their weights as not stellar, but better than I expected from a manufacturer
My main gripe with them is that their offsets are terrible (at least 20mm too conservative) and the design is somewhat polarising (although I personally don't mind them, despite not being in love with them)
Stock wheel weights:
Front: 15.2kg / 33.5lb
Rear: 16.0kg / 35.3lb
Work Schwert weights:
Front 14.2kg / 31.3lb
Rear 14.8kg / 32.6lb
Some context: Work make proper JDM wheels but among the best japanese wheel makers, they are on the heavier side. You can definitely get much lighter from brands like Volk and Advan, especially in forged 1 piece form. But given that the stock wheels are about 1kg away from good aftermarket wheels, I would consider their weights as not stellar, but better than I expected from a manufacturer
My main gripe with them is that their offsets are terrible (at least 20mm too conservative) and the design is somewhat polarising (although I personally don't mind them, despite not being in love with them)
Steve
Thread
Thread Starter
Forum
Replies
Last Post
DS2k
IS F (2008-2014)
26
Sep 18, 2015 01:29 PM
