When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I removed my lights and adjusted them. Because of the slope of the lower door edge, the logos originally projected at an angle, making the image look distorted. After adjusting the projector, the logos now appear symmetrical and clearer. Very easy to adjust: remove white back panel, loosen two phillips screws, adjust the angle (I maxed mine all the way to the appropriate direction), tighten screws, replace back panel, done. BTW - don't forget - when removing the fixtures, the lights don't pry from the same side on each door. There's a small nub on the side you pry from. On the passenger side, it's the rear of the lens. On the driver's side, it's the front of the lens.
Interior Lights upgrade looks great... Please can you
provide some details on how and where you spliced the lights into? I received the same lights and there's an inline fuse connection and another with a capped looking wire exposed connector.. Thanks in advance!
I am looking for a set of the Lexus projector lights and the ebay and Amazon links mentioned in this thread no longer work. Any idea where I can find them?
Take a moment to pull the factory light out of one of your doors and have it to
compare with the on screen thumbnail shot. I like the $18 set from Amazon so
much I am gifting two set to friends this Zoom Holiday!
New lighting video posted today. This car has the rear seat cover and fender flares. I have seen the wide body kits on the LC, not sure that I've seen these.