Getting ready to install this lip and was wondering about others experiences during install. I happen to notice a hose thats runs along the inside of the lower front bumper when I was upgrading fogs. I assume the headlight washer fluid hose. Anyhow I want avoid any unwanted drilling mishaps and wondering how other installs have gone. I also could wrong on the hose placement and where the actual lips holes will be drilled. Any input would be appreciated!

 

find some pictures of the bumper off the car...be careful you dont drill into the windshield wiper reservoir

 

I just used the screws it came with plus the original 2 bolts on the ends plus double sided tape. 30 mins total

 

Yep, I'll be doing the same. I've installed BaysonR lips on other platforms before, but the only thing that got me questioning is that hose I saw when installing updated fogs and knowing that I'll be pre-drilling in that very location. Thanks!

 

I didn't predrill anything. I just went screws to underside of bumper. They're really small holes made by the screws

 

mine kinda looks like dump...everyone else's looks good but my lip kinda angles up and it like straight up flush with my front bumper and I did exactly what everyone else did...or so i thought...i didnt predrill anything i just screwed them into the bumper form the predrilled holes on the lip.

 

You got a pic?
Very simple, straight forward install.
I don't use any double sided tape either, just the screws that came with the lip and the 2 end screws on the car. I've even hit a opposum at around 60 mph...Just broke one screw.....Lip and everything else held up and is perfect....Super amazed the lip didn't crack or break.
Bayson R needs to hurry and make a rear diffuser and side skirts!!!!

V.

 

Probably have to shape it a bit with a heat gun because it is made of plastic.

 

i installed about 6 months ago and I gave it a nice curb rash too but still holding up.

 

heres mine...i dont know why mine aims up and so close to the bumper..looks like dump like i said haha.

 

^^^something looks way off on yours..it's mounted too far back it seems. Here's mine.

 

are u taking a ****?
.
.
.
it's upside down....

 

 

LOL.. It's on upside down

 

LMFAO OH MY GAWDDDDD HAHAHHAHAHAHAHAH WOWWWWWWWWWWW

thank you ahhahahahhahhahahahhahah