Lexus ISF Skid Plate
#1
Lexus ISF Skid Plate
Since lowering the ISF, the front skip plate (highlighted in Red below) makes a horrible noise when I hit a bump or drive over a lower section of the road (road in my city Calgary, Alberta, Canada sux).
Anyone has suggestion how to reduce the horrible noise.
Anyone has suggestion how to reduce the horrible noise.
#6
are you sure its those flaps and not your fender liner?
i lowered and one section of the fender liner started rubbing when i was reversing at a certain angle.
The vents were scrapping the tire. i just cut the piece out and everything was good
i lowered and one section of the fender liner started rubbing when i was reversing at a certain angle.
The vents were scrapping the tire. i just cut the piece out and everything was good
#7
Right now I have removed the flaps.. it is still making noise from the fender liners.. but it's not as bad..
I used a heat gun to push the fender liner in as much as possible. Would you please take some pictures of what you did with your fender liner.
Trending Topics
#8
Tech Info Resource
iTrader: (2)
The "flaps" reduce drag and improve fuel economy as well as top speed if you can remove the speed limiter.
Thread
Thread Starter
Forum
Replies
Last Post
Sirguy01
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
3
04-24-16 04:58 PM