Official IS-F Drag Time/Dyno Time/Performance Thread
#211
Dyno Down Under - Had a chance to put my bucket of bolts on a Dyno today at a local Spring Nats in country Vic.
Car pulled 263.1 Kw / 352.8 HP on first run in 5th (21C outside temp).
Car pulled 263.1 Kw / 352.8 HP on first run in 5th (21C outside temp).
Last edited by Blacky; 11-28-11 at 12:02 AM.
#212
Driver School Candidate
Join Date: Oct 2011
Location: CO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Here is my baseline on a Dyno Dynamics machine in Colorado Springs, everyone I've spoke to says this is the most accurate machine in Colorado... The numbers shown are corrected to adjust for the 6000 feet of nose bleed elevation we have here. I asked the guy what the "real" number was and he calcualted it out at 301 for todays reading. I cant wait to buy some upgrades
http://youtu.be/14SazfVs2Gg
http://youtu.be/14SazfVs2Gg
#221
Lead Lap
iTrader: (2)
Join Date: Nov 2002
Location: NJ
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
I went to Atco Raceway tonight being a nice cool night in the 40's. I couldn't get these M/T ET Streets to hook up. I tried launching anywhere from 1500 to 3000 rpm. Tire pressures from 20-26psi. The best 60' I got was a 1.99. Best E.T. was 12.6 @ 113 mph. Any tips on launching is appreciated.
Last edited by DHRP; 03-28-12 at 09:17 AM. Reason: Changed to 1500 rpm not 500.
#222
11 Second Club
iTrader: (2)
I went to Atco Raceway tonight being a nice cool night in the 40's. I couldn't get these M/T ET Streets to hook up. I tried launching anywhere from 500 to 3000 rpm. Tire pressures from 20-26psi. The best 60' I got was a 1.99. Best E.T. was 12.6 @ 113 mph. Any tips on launching is appreciated.
#223
Lead Lap
iTrader: (2)
Join Date: Nov 2002
Location: NJ
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Atco doesn't let you drive around the water box. Here's a video inside the car. It was around 42 degrees during this part of the night. I thought I heated them up ok. I also hear you are not supposed to do a long burnout with these drag radials. I'll have try another day or another track.
#224
11 Second Club
iTrader: (2)
Atco doesn't let you drive around the water box. Here's a video inside the car. It was around 42 degrees during this part of the night. I thought I heated them up ok. I also hear you are not supposed to do a long burnout with these drag radials. I'll have try another day or another track.
http://www.youtube.com/watch?v=snH3awLpyAc
http://www.youtube.com/watch?v=snH3awLpyAc
Btw what are your mods?
#225
Lead Lap
iTrader: (2)
Join Date: Nov 2002
Location: NJ
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Ahh, I didn't think about going into 2nd. I'll try that out next time. Are you running the same M/T's - 245/40/18?
Joe Z intake pipe with OEM filter. I just had the ISS Forged DES exhaust installed last Thursday.
Joe Z intake pipe with OEM filter. I just had the ISS Forged DES exhaust installed last Thursday.