ISC compatible parts?
#1
ISC compatible parts?
Hi guys
first post on the C forum section
looking to buy a IS250c
im very familiar with the ISF/IS250/350 chassis on the 2nd gens
but new to the converts
my question is
are the suspension layouts
brakes etc similar to its 4 door siblings?
i can see that axle backs might not fit due to the longer rear
but suspension and brakes sway bars etc all same with the 4 doors?
thanks much
first post on the C forum section
looking to buy a IS250c
im very familiar with the ISF/IS250/350 chassis on the 2nd gens
but new to the converts
my question is
are the suspension layouts
brakes etc similar to its 4 door siblings?
i can see that axle backs might not fit due to the longer rear
but suspension and brakes sway bars etc all same with the 4 doors?
thanks much
#2
suspension wise, springs and coilovers, camber etc. are the same as the sedan. I know the rear sway bar doesn't work, learned the hard way. not sure about the front.
exhaust is different, its different at the split towards the mufflers. only one available is the f sport. ive looked at just modifying the sedan piping off aftermarket exhausts if you want something besides the f sport.
exhaust is different, its different at the split towards the mufflers. only one available is the f sport. ive looked at just modifying the sedan piping off aftermarket exhausts if you want something besides the f sport.
Thread
Thread Starter
Forum
Replies
Last Post
Gernby
IS - 2nd Gen (2006-2013)
5
09-01-06 11:38 AM