TE37 Fitment. PLEASE HELP!
Thread Starter
Driver School Candidate
Joined: Aug 2018
Posts: 31
Likes: 3
From: ONTARIO
TE37 Fitment. PLEASE HELP!
I found a great deal on TE37's for my 2018 IS300.
The specs of the wheels are 18x10 square and the rubber is 265/35/18
Will I have any issues with this fitment?
Also, I'm current lowered on rsr down springs
The specs of the wheels are 18x10 square and the rubber is 265/35/18
Will I have any issues with this fitment?
Also, I'm current lowered on rsr down springs
Lexus Test Driver
Joined: Feb 2017
Posts: 6,260
Likes: 1,752
From: Richmond Hill, Ontario, Canada
We need to know the offsets to determine fitment.
Having said that, the rims won't fit the front regardless of offset...just too wide.
The rear might fit if they were a +45, or close to.
Having said that, the rims won't fit the front regardless of offset...just too wide.
The rear might fit if they were a +45, or close to.
Thread Starter
Driver School Candidate
Joined: Aug 2018
Posts: 31
Likes: 3
From: ONTARIO
Sorry! Just realized I didn't include that. Offset is +40.
And yeah I figured it would be too wide. Was gonna get it test fitted but would rather find out now than waste my time.
Thank you Sasnuke!
And yeah I figured it would be too wide. Was gonna get it test fitted but would rather find out now than waste my time.
Thank you Sasnuke!
I'm running 18x9.5+30 235/40 and 18x20+38 255/35. lowered on rsr downs. fits tight, very little rubbing
for your wheels, the rears will clear with 2-3 degrees of camber. the fronts.... no chance.
for your wheels, the rears will clear with 2-3 degrees of camber. the fronts.... no chance.
Richie was running the exact same set up https://www.clublexus.com/forums/bui...thread-11.html
If I recall correctly, he rubbed on hard turns
If I recall correctly, he rubbed on hard turns
Thread
Thread Starter
Forum
Replies
Last Post
glentzl
IS - 1st Gen (2001-2005)
14
Apr 23, 2012 06:16 AM
