Retro Fit 2017 F-Sport to 2014 F-Sport
#64
Pole Position
Thread Starter
I just wanted to update anyone following this thread. I am moving forward with the project. I finally got the lights in and I am waiting on some parts to arrive. I will keep y’all updated. I will need SpecOnes help with the light wiring and anyone else’s inputs are welcome. Thank you
The following users liked this post:
LexoticJ (12-17-18)
#67
Pole Position
Thread Starter
#68
Pole Position
Thread Starter
Does anyone have an idea in what it would take for me to plug my Japan taillights to my car? The taillights have a one single 6pin harness. My car has two harness. One is a socket for turn signal bulb and the other is a black 3pin harness that powers the rest of the corne light.
I don’t think the harnesses for the 2017+ would help much since I would still need to splice the turn signals.
What do you think?
I don’t think the harnesses for the 2017+ would help much since I would still need to splice the turn signals.
What do you think?
#69
The harness you're holding for the 2017 lights replaces the one on your car that has the 2 connectors/bulb sockets on it. You need to take that off the car and use the one from the new lights in place of it. Your car will have the 6-pin connector, you just need to go further to get to it in the quarter panel.
Jeff
Jeff
#70
Pole Position
Thread Starter
The harness you're holding for the 2017 lights replaces the one on your car that has the 2 connectors/bulb sockets on it. You need to take that off the car and use the one from the new lights in place of it. Your car will have the 6-pin connector, you just need to go further to get to it in the quarter panel.
Jeff
Jeff
Thank you very much Jeff.
The following users liked this post:
ybenzo (06-27-24)
#72
Does anyone have an idea in what it would take for me to plug my Japan taillights to my car? The taillights have a one single 6pin harness. My car has two harness. One is a socket for turn signal bulb and the other is a black 3pin harness that powers the rest of the corne light.
I don’t think the harnesses for the 2017+ would help much since I would still need to splice the turn signals.
What do you think
I don’t think the harnesses for the 2017+ would help much since I would still need to splice the turn signals.
What do you think
#75
Pole Position
Thread Starter
Thanks Tino. I have a feeling that I might need to splice the wires too. I am gonna trace the wires back like Jeff stated and see if I could actually find a 6 pin harness to disconnect the existing harness/socket and plugging in the ones from the light. I’ll look into it this weekend.
Thanks Amiricle55. Should look nice once all done. I am excited for it
Thanks Amiricle55. Should look nice once all done. I am excited for it