IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

Wheel spec fitment question

Thread Tools
 
Search this Thread
 
Old Sep 20, 2016 | 11:55 AM
  #1  
Phamkq's Avatar
Phamkq
Thread Starter
Driver
 
Joined: Jun 2016
Posts: 183
Likes: 8
From: CA
Default Wheel spec fitment question

Front: 19x9.5, 25 offset
Rear: 19x10.5, 25 offset

2014 Lexus IS, will those fit? Will be on stock suspension for a few months then maybe coilovers after

Tire sizes I have in mind (but give me your recommendations!) will be very appreciated.

Rear tire: 235/35 ZR 19
Front tire: 215/35 ZR 19

Anyone with this fitment and have any issues?
Reply
Old Sep 20, 2016 | 01:01 PM
  #2  
specONE's Avatar
specONE
Pole Position
15 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Jan 2008
Posts: 2,002
Likes: 533
From: SF, California
Default

all i can say, Good Luck with those specs, lol.
you'll need extreme camber in the rear to clear.
the front will be close really close
Reply
Old Sep 20, 2016 | 01:40 PM
  #3  
jkhang714's Avatar
jkhang714
Lead Lap
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 420
Likes: 42
From: CA
Default

Im running 19x9.5 +25 fronts and 19x10 +35 rears. All fenders pulled and rolled. Camber in rears.
Reply
Old Sep 20, 2016 | 01:51 PM
  #4  
dnasians's Avatar
dnasians
Lexus Test Driver
iTrader: (4)
 
Joined: Nov 2014
Posts: 890
Likes: 19
From: CA
Default

those specs are wayyyyyyyy too aggressive. that on stock suspension would look terrible and it'd take some serious work to fit them when lowered.... if they fit at all.
Reply
Old Sep 20, 2016 | 05:43 PM
  #5  
gpxluke's Avatar
gpxluke
Former Sponsor
iTrader: (2)
 
Joined: Jan 2014
Posts: 505
Likes: 38
From: Vancouver BC
Default

I'm at 19x8.5 et33 245/35/19 19x9.5 et31 265/30/19 rear fender rolled and pulled camber -2.3 one finger gap all around. I think this is the limit of the car running meaty tires at this stance
Reply
Old Sep 20, 2016 | 05:45 PM
  #6  
jkhang714's Avatar
jkhang714
Lead Lap
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 420
Likes: 42
From: CA
Default

The front wheels specs doesnt look bad on stock suspension. (I ran the front specs on stock suspension before). The rear specs will poke out i believe. Its all in the style OP is planning to achieve.
Reply
Old Sep 21, 2016 | 02:45 PM
  #7  
Phamkq's Avatar
Phamkq
Thread Starter
Driver
 
Joined: Jun 2016
Posts: 183
Likes: 8
From: CA
Default

Thanks everyone for their feedback, it really helped. Just saw a great deal on some wheels I've been wanted but wanted to make sure they fit. I had an iffy feeling when I saw 10.5 wides and et25
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yorkie740
IS - 2nd Gen (2006-2013)
4
Mar 26, 2016 12:49 AM
Gville350
IS - 2nd Gen (2006-2013)
11
Aug 19, 2014 05:19 PM
dkangphoto
LS - 3rd Gen (2001-2006)
2
Jan 25, 2014 05:23 PM
sam430
GS - 2nd Gen (1998-2005)
11
May 20, 2011 08:52 AM




All times are GMT -7. The time now is 12:37 AM.