intro
03-13-16, 03:04 PM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
intro
hi there, new to the forum and proud new owner of a 07 tungsten pearl is250 rwd. 
joined about a month ago, i did a lot of researching and reading on this forum (very helpful information btw) from springs/coilovers to wheel fitment and all BUT i want to double check before i start buying parts.
my main concern is wheel fitment. i decided to go with varrstoen ES1 19x8.5f +35 and 19x9.5r +40, tire sizes will be 235/35/19 and 265/30/19. also my car will lowered on BC coil overs. i want to double check if these will fit without rubbing issue and no fender modification?
joined about a month ago, i did a lot of researching and reading on this forum (very helpful information btw) from springs/coilovers to wheel fitment and all BUT i want to double check before i start buying parts.
my main concern is wheel fitment. i decided to go with varrstoen ES1 19x8.5f +35 and 19x9.5r +40, tire sizes will be 235/35/19 and 265/30/19. also my car will lowered on BC coil overs. i want to double check if these will fit without rubbing issue and no fender modification?
03-13-16, 03:43 PM
#3
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
03-13-16, 07:52 PM
#7
Driver School Candidate
Thread Starter
Join Date: Feb 2016
Location: oregon
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
those are the answers i've been getting.... some say it should be ok. others say gonna have to roll fenders... i would of thought going with these offsets will avoid any problems.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
dynamax
IS - 2nd Gen (2006-2013)
7
07-30-09 11:40 PM