Building an IS350 6MT
#24
No, my goal for this is for it to drive like stock, so stock-type (TSB updated rubber-dampened) clutch disc with just the heavier pressure plate.
I am going to be experimenting with a larger clutch disc, but don't fully expect it to fit. If it can fit it will give me a higher torque rating, but it's not required.
Jeff
I am going to be experimenting with a larger clutch disc, but don't fully expect it to fit. If it can fit it will give me a higher torque rating, but it's not required.
Jeff
#25
Pole Position
Join Date: Aug 2013
Location: Australia
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Hey Jeff,
This conversion has been done over on the Australian forums:
Build: http://au.lexusownersclub.com/forums...50-conversion/
More video/pictures: http://au.lexusownersclub.com/forums...-manual-trans/
If you get stuck I'm sure the guys there would be happy to help as well. All the best!
This conversion has been done over on the Australian forums:
Build: http://au.lexusownersclub.com/forums...50-conversion/
More video/pictures: http://au.lexusownersclub.com/forums...-manual-trans/
If you get stuck I'm sure the guys there would be happy to help as well. All the best!
#27
Hey Jeff,
This conversion has been done over on the Australian forums:
Build: http://au.lexusownersclub.com/forums...50-conversion/
More video/pictures: http://au.lexusownersclub.com/forums...-manual-trans/
If you get stuck I'm sure the guys there would be happy to help as well. All the best!
This conversion has been done over on the Australian forums:
Build: http://au.lexusownersclub.com/forums...50-conversion/
More video/pictures: http://au.lexusownersclub.com/forums...-manual-trans/
If you get stuck I'm sure the guys there would be happy to help as well. All the best!
Holy hell ! I never knew it was possible. Now I have something to look forward to once i get bored of the auto box.
I wonder is he can give us a detailed review in comparison to the auto. Does it make the car faster ?
The following users liked this post:
Goopi (08-16-23)
#30
Racer
iTrader: (2)
Do you have to get the hole dash out?I saw the Australian did.He had a 06 and swapped a 11 350 engine.Do you think he used the VDIM from the wrecked IS350 or not?I m in the same position and I really like to know that for sure.Please let me now if you find that out during the swap