Rudebwoy30

Hey All i am lowered on Tein S tech springs. When i bought the car the front tires were bad due to negative camber. So i replaced them. Now my rear tires are very low on the inside due to negative camber as well. Does the 2008 Lexus IS 250 come with any adjustable camber on the car from factory. If not what would be needed to fix camber issues in the front and the rear and what are the good quality companies

metaleckz

iTrader: (9)

Megan. I dont think you need camber kits for lowering springs but if you have the money why not lol

Edit: do the alignment first

Sffd103

iTrader: (16)

Not adjustable from factory. Megan makes read and front camber arms. SPC makes adjustable upper ball joints for the front. If you're looking for positive camber you can get it.

Gville350

iTrader: (10)

Toe and camber is probably off; get an alignment AFTER the new tires are installed.

Rudebwoy30

ive had the car aligned before. But dont you notice the uneven wear by time the tire is already bad. Or is it when they do the alignment then you can see if the camber is off and thats when ill need to buy

Sffd103 so you need both megan rear and front camber arms along with spc upper ball joint for the front to fix the issue?

lysis250

iTrader: (18)

When I had my car, I was lowered so to save myself the hassle of eating tires a lot I just got the Megan Front Upper Control Arm, and Megan Rear Camber Arms to zero out the camber. If you go to the classifieds there is a set for the front for sale. And no you won't need the SPC ball joints if you get the Megan front and the other way around.

Gville350

iTrader: (10)

^You had the shop zero out your camber, or the toe? You NEED some negative camber!

lysis250

iTrader: (18)

I had about 1.3-1.5 negative camber after adjustment. Before that it was around 3 degrees witch was too much for me, but yes I also needed to adjust Toe which was not a problem with the factory toe arms.

Rudebwoy30

from factory the 2IS comes with adjustable toe arms?

Sffd103

iTrader: (16)

No it doesn't. Look up Megan upper A arms for your fronts.

Scott610

iTrader: (3)

Get adjustable camber kit and adjustable control arms then get alignment had it done on my gs with it lowered will only help a little will still wear in inside depends on offset on the the wheels too

Nixcision

iTrader: (3)

Toe is adjustable on a stock 2is!!!

Rudebwoy30

Also read that from another members post as well.. Toe is adjustable on 2IS

Nixcision

iTrader: (3)

^ The only issue is that the amount of adjustability on a stock setup is limited, as opposed to aftermarket parts..

Im still trying to figure out (is250 awd):

-camber arms for the front (can't find any that work with awd) or just go with spc ball joints?
-do i need toe components or will stock suspension be able to accommodate a 3" drop?
-if so, what toe parts are available for the front (awd)? I have already found some for the rear

Rudebwoy30

Can anyone else confirm that the 2IS comes with adjustable toe from factory??