there is no way for that as far as i know of on a pre 2011 with the LED headlight swap. you just have to roll like that with the parking lights on. i asked the same thing when i made the swap but there was no way. on the 2011+ cars the LED was their DRL, its not on a pre 2011

i did the wire swap so the LED were 100% all the time too

 

My set from Sewell didn't work when I plugged it straight in for some reason.
I used a circuit tester to find the wire in the plug that it should have used to power it up and ran my own wire instead.

@SKStark when you say you rewired it, how did you do it? It sounds like you might have ran a wire to the lights, you can do what I did and run a wire from the ignition so it turns on when you turn the car on.