Rock gaurds?
#2
Lead Lap
Thread Starter
Join Date: Jan 2014
Location: NC
Posts: 612
Likes: 0
Received 0 Likes
on
0 Posts
Is it just a clear film I cut myself or do they sell it pre-cut?
Maybe I will get some like this porsche
http://forums.rennlist.com/rennforum...rds-slide1.jpg
Maybe I will get some like this porsche
http://forums.rennlist.com/rennforum...rds-slide1.jpg
#4
Pole Position
iTrader: (4)
Join Date: Apr 2013
Location: CA
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
you can buy it and spend more... or just get the 3m clear bra spray for $5-10 and apply it in the same area and the best part you just spray it on and not worry about bubbles or anything.
All it is, is a piece of vinyl so not worth buying from Lexus.
All it is, is a piece of vinyl so not worth buying from Lexus.
#5
Fire Slayer
iTrader: (16)
You can do something like what Dexter did. He added a black piece like the porches you posted. https://www.clublexus.com/forums/is-...rs-thread.html
Last edited by Sffd103; 07-08-14 at 11:02 AM.
#6
You can do something like what Dexter did. He added a black piece like the porches you posted. https://www.clublexus.com/forums/is-...rs-thread.html
To the OP, I just removed mine this past weekend, I used a heat gun, a plastic blade scrapper that doesn't harm the paint, goo gone, meguiars scratch X and finished with wax. As you heat it you'll notices is starts to shrink then you use your scrapper and it peels like butter, just take your time a it is doable.
After that, grab clean cloth, some goo gone and remove the remaining glue from the paint. Later, use your scratch X to remove any micro scratch you could have done and finish with wax. For me it came out perfect.
Last edited by 3sm1l; 07-08-14 at 01:10 PM.
#7
Fire Slayer
iTrader: (16)
I like it. How did he exactly do it? I'd like to do that to mine.
To the OP, I just removed mine this past weekend, I used a heat gun, a plastic blade scrapper that doesn't harm the paint, goo gone, meguiars scratch X and finished with wax. As you heat it you'll notices is starts to shrink then you use your scrapper and it peels like butter, just take your time a it is doable.
After that, grab clean cloth, some goo gone and remove the remaining glue from the paint. Later, use your scratch X to remove any micro scratch you could have done and finish with wax. For me it came out perfect.
To the OP, I just removed mine this past weekend, I used a heat gun, a plastic blade scrapper that doesn't harm the paint, goo gone, meguiars scratch X and finished with wax. As you heat it you'll notices is starts to shrink then you use your scrapper and it peels like butter, just take your time a it is doable.
After that, grab clean cloth, some goo gone and remove the remaining glue from the paint. Later, use your scratch X to remove any micro scratch you could have done and finish with wax. For me it came out perfect.
Thread
Thread Starter
Forum
Replies
Last Post
zmcgovern4
Automotive Care & Detailing
10
08-14-15 03:10 AM
Billy305
SC- 1st Gen (1992-2000)
34
06-06-11 09:40 PM
RXSF
Automotive Care & Detailing
3
04-03-11 06:39 PM