Notices
IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

Plastic undertray panel hanging down

Thread Tools
 
Search this Thread
 
Old Sep 20, 2013 | 01:10 PM
  #1  
PondScum's Avatar
PondScum
Thread Starter
Driver
 
Joined: Jul 2013
Posts: 176
Likes: 1
From: CA
Default Plastic undertray panel hanging down

My wife has a 2010 IS250 C. I was driving behind her a couple weeks ago and noticed that the plastic undertray panel on the driver's side was hanging down. The left side of it was still attached but the right side, closer to the center of the car, was loose so that side was hanging down.

When I asked her about it she reminded me that she told me she ran over something the week before (didn't see it until it was too late to avoid it). Right now we're at our vacation house for a couple months where I have limited tools (no floor jack) so I haven't been able to get a good look at the damage. I'm just wondering - is it usually just the fasteners that pop out, and the panel itself is ok, or does the panel itself usually get damaged too? The panel looks mostly intact, it wasn't split in two or anything like that.
Reply
Old Sep 20, 2013 | 03:14 PM
  #2  
4TehNguyen's Avatar
4TehNguyen
Lexus Fanatic
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (1)
 
Joined: Jan 2006
Posts: 26,200
Likes: 70
From: Houston, Texas
Default

yea the fasteners could pop off but some of it is bolted on. It could have ripped the panel out of the fastener too. Youll just have to get down there maybe with a light and mirror to look around until you get a jack
Reply
Old Sep 20, 2013 | 04:13 PM
  #3  
don's Avatar
don
Lexus Champion
iTrader: (2)
 
Joined: Mar 2010
Posts: 4,075
Likes: 4
From: San Jose
Default

I had this happen to me. Half of the panel was broken/ripped off but it was still hanging on from the other screws pretty well. I tried to ignore it but when going on the freeway, it would viciously bounce up against the car like a diving board. The noise got pretty annoying so I had to remove that panel altogether.

Not sure what caused it to detach in the first place though.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sjowett
RX - 3rd Gen (2010-2015)
18
Oct 10, 2019 04:39 PM
Ratatat
SC - 1st Gen (1992-2000)
1
Mar 9, 2009 03:44 PM
Tego1090
GS - 3rd Gen (2006-2011)
11
Aug 14, 2008 06:23 PM
i3urton
IS - 2nd Gen (2006-2013)
1
Oct 7, 2007 08:35 PM
Aclarke
IS - 2nd Gen (2006-2013)
1
Aug 14, 2006 11:52 AM




All times are GMT -7. The time now is 03:32 AM.