When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
and what size tires would you preferably like to run: narrowest tires possible to make the wheels fit, typical +1 tire sizing, or the meatiest tires you can stuff under the fenders?
the Linea Corse wheel from wheeldude is 19x8.5 F 19x10 R. I initially wanted the Varrstoen because of decent price and looked pretty good. My first choice overall was the Vossen Cv3 but had doubts about 20's not to mention those would be very pricey.
Yeah, you can lower the car, but your coilover or springs gotta be somewhat stiff. trust me...
Regarding tire sizes go with 225/35/19 front and 235/35/19 rear. Go with BC coilovers and have them give you stiff spring rates. And stick with the 22 offset.
I thought that the +22 offset would require some fender mods
all of those offsets will require COILS AND FENDER MODS. spring drop wont camber enough to fit those at all, and first time you hit a bump on the freeway your going to WRECK your fenders. PLEASE do your self a favor, and get wheels with offsets in the 30s if your only doing springs.
actually spring drop with no mods ive answered 100s of times
19x8.5+27 215/35
19x9.5+30 235/35
this is no fender mod spring drop no rub.
Hey, i was looking into the 18 inch version of this wheel. Its 18x9 with 40 offset. The offset is high on a wide wheel, I was wondering if it will work without spacers?
Hey, i was looking into the 18 inch version of this wheel. Its 18x9 with 40 offset. The offset is high on a wide wheel, I was wondering if it will work without spacers?
the offset will work without spacers, given that they clear the 2is brake calipers.
My opinion I think 18's would look small without having a good drop, considering the stepped lip makes the face look smaller.
Yea, ive already considered that. Im gonna get 18s anyways lol. I will be dropped but not extremely low. Just gettin rid of some wheel gap. Just gotta make sure this will fit right!