Will those wheels fit? START HERE.
#5341
those look like as wide as you can go! right to the limit! =)
#5342
Leon Hardiritt Ordens 18" re-build...IS gurus HELP please!
What's up CL...so I've had a set of 18" ordens sitting around in my garage and I've decided to slap them on my 06 IS250 (looking to build as close to correct fitment as possible). I currently have 6.5" and 7.5" inner barrels and multiple lips (2) pairs of 2" lips/ pair of 2.5" lips/ pair of 3.5" lips. Ideally I would like to be able to swap stock wheels and tires with these new Ordens without having to re-adjust camber, ride height etc. Faces/inners and outers are all at the shop currently about to be built to:
18x8.5 +18 (High disk 6.5" inner / 2" lip) : with 225/35/18 tires front
18x9.5 +35 (Low disk 7" inner / 2.5" lip) : with 245/35/18 tires rear
I'm currently riding pretty low on Megan LPs with stock wheels and tires and rear fenders rolled. QUESTION is the above fitment decent without any fender mods (don't mind rolling if needed) or should I change my build to:
FRONT: 18x9 +23 (High disk 7" inner / 2" lip) ......TEST fit proved lip to fender ratio super flush due to high disk (possibly need to roll front fenders)
REAR: 18x9 +29 (low disk 6.5" inner / 2.5" lip)
TIRES: 225/35 AND 245/35
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip) will low disk in front clear front IS250 calipers?
REAR: 18x9.5 + 18 (High disk 7" inner / 2.5" lip) Is it awkward to run high disk in the rears for IS250?
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip)
REAR: 18x9 +24 (high disk 7" inner / 2" lip)
If i'm going to change up the build I need to make a decision in the next couple of days! GURUs please help!
18x8.5 +18 (High disk 6.5" inner / 2" lip) : with 225/35/18 tires front
18x9.5 +35 (Low disk 7" inner / 2.5" lip) : with 245/35/18 tires rear
I'm currently riding pretty low on Megan LPs with stock wheels and tires and rear fenders rolled. QUESTION is the above fitment decent without any fender mods (don't mind rolling if needed) or should I change my build to:
FRONT: 18x9 +23 (High disk 7" inner / 2" lip) ......TEST fit proved lip to fender ratio super flush due to high disk (possibly need to roll front fenders)
REAR: 18x9 +29 (low disk 6.5" inner / 2.5" lip)
TIRES: 225/35 AND 245/35
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip) will low disk in front clear front IS250 calipers?
REAR: 18x9.5 + 18 (High disk 7" inner / 2.5" lip) Is it awkward to run high disk in the rears for IS250?
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip)
REAR: 18x9 +24 (high disk 7" inner / 2" lip)
If i'm going to change up the build I need to make a decision in the next couple of days! GURUs please help!
#5343
Hi CL,
Just wondering if I would have to do any fender work with this set up.
I'm on coils.
Front: 18x8.5 +30 -- 225/35/18
Rear: 18x9.5 +35 -- 265/35/18
Second option
Front: 18x9.5 +35 -- 245/35/18
Rear: 18x9.5 +35 -- 265/35/18
Does anyone have pics of this set up.. I really wanna pull the trigger on these wheels.
Just wondering if I would have to do any fender work with this set up.
I'm on coils.
Front: 18x8.5 +30 -- 225/35/18
Rear: 18x9.5 +35 -- 265/35/18
Second option
Front: 18x9.5 +35 -- 245/35/18
Rear: 18x9.5 +35 -- 265/35/18
Does anyone have pics of this set up.. I really wanna pull the trigger on these wheels.
#5344
will Low disk ordens clear IS250 front calipers
What's up CL...so I've had a set of 18" ordens sitting around in my garage and I've decided to slap them on my 06 IS250 (looking to build as close to correct fitment as possible). I currently have 6.5" and 7.5" inner barrels and multiple lips (2) pairs of 2" lips/ pair of 2.5" lips/ pair of 3.5" lips. Ideally I would like to be able to swap stock wheels and tires with these new Ordens without having to re-adjust camber, ride height etc. Faces/inners and outers are all at the shop currently about to be built to:
18x8.5 +18 (High disk 6.5" inner / 2" lip) : with 225/35/18 tires front
18x9.5 +35 (Low disk 7" inner / 2.5" lip) : with 245/35/18 tires rear
I'm currently riding pretty low on Megan LPs with stock wheels and tires and rear fenders rolled. QUESTION is the above fitment decent without any fender mods (don't mind rolling if needed) or should I change my build to:
FRONT: 18x9 +23 (High disk 7" inner / 2" lip) ......TEST fit proved lip to fender ratio super flush due to high disk (possibly need to roll front fenders)
REAR: 18x9 +29 (low disk 6.5" inner / 2.5" lip)
TIRES: 225/35 AND 245/35
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip) will low disk in front clear front IS250 calipers?
REAR: 18x9.5 + 18 (High disk 7" inner / 2.5" lip) Is it awkward to run high disk in the rears for IS250?
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip)
REAR: 18x9 +24 (high disk 7" inner / 2" lip)
If i'm going to change up the build I need to make a decision in the next couple of days! GURUs please help!
18x8.5 +18 (High disk 6.5" inner / 2" lip) : with 225/35/18 tires front
18x9.5 +35 (Low disk 7" inner / 2.5" lip) : with 245/35/18 tires rear
I'm currently riding pretty low on Megan LPs with stock wheels and tires and rear fenders rolled. QUESTION is the above fitment decent without any fender mods (don't mind rolling if needed) or should I change my build to:
FRONT: 18x9 +23 (High disk 7" inner / 2" lip) ......TEST fit proved lip to fender ratio super flush due to high disk (possibly need to roll front fenders)
REAR: 18x9 +29 (low disk 6.5" inner / 2.5" lip)
TIRES: 225/35 AND 245/35
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip) will low disk in front clear front IS250 calipers?
REAR: 18x9.5 + 18 (High disk 7" inner / 2.5" lip) Is it awkward to run high disk in the rears for IS250?
OR
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip)
REAR: 18x9 +24 (high disk 7" inner / 2" lip)
If i'm going to change up the build I need to make a decision in the next couple of days! GURUs please help!
FRONT: 18x8.5 +35 (Low disk 6.5" inner / 2" lip)
REAR: 18x9 +24 (high disk 7" inner / 2" lip)
I know having 2" lips will be pretty weak but having 2" lips front and back for consistency should make it look more OEM? Anyway the real question is will Low disk ordens clear an IS250 front caliper?
#5345
Driver School Candidate
Join Date: Mar 2017
Location: Ohio
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
So I am terrible at determining if wheels will fit so I will just ask here. Car is lowered with rolled rear fenders
Front 18x8.5 +30 245/35/18
rear 18x9.5 +35 275/35/18
Front 18x8.5 +30 245/35/18
rear 18x9.5 +35 275/35/18
#5346
So I am terrible at determining if wheels will fit so I will just ask here. Car is lowered with rolled rear fenders
Front 18x8.5 +30 245/35/18
rear 18x9.5 +35 275/35/18
Front 18x8.5 +30 245/35/18
rear 18x9.5 +35 275/35/18
#5347
Driver School Candidate
Join Date: Mar 2017
Location: Ohio
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#5349
Driver School Candidate
Join Date: Mar 2017
Location: Ohio
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#5350
Driver School Candidate
Join Date: Oct 2016
Location: CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Please Help!!
hi, i'm new on here, please help!!!!
i have 19x10 rims +24 offsets on a 07 is250 rwd...
what's the widest tires i can put on?
i would like to keep it as flush as possible without any crazy camber adjustments... would consider rolling the fenders.
THANKS!!!!
i have 19x10 rims +24 offsets on a 07 is250 rwd...
what's the widest tires i can put on?
i would like to keep it as flush as possible without any crazy camber adjustments... would consider rolling the fenders.
THANKS!!!!
#5351
Great Deal Guru
iTrader: (5)
Staggered Tires Fitment help
Hi Guys,
Hope someone can help me choose the correct size of tires for my following wheels:
2006 Lexus IS model: 350
Wheel Make & Model: Miro 111
Wheel Size (diameter and width): 19 x 8.5 F & 19 x 9.5 R
Wheel Offset Front: +35
Wheel Offset Rear: +40
Tire Size Front: 235/35/19??
Tire Size Rear: 275/30/19??
Car is lowered 1.5" springs
I dont want any major rubbing or any at all if possible
Any help will be appreciated.
Thanks in advance,
Tito
Hope someone can help me choose the correct size of tires for my following wheels:
2006 Lexus IS model: 350
Wheel Make & Model: Miro 111
Wheel Size (diameter and width): 19 x 8.5 F & 19 x 9.5 R
Wheel Offset Front: +35
Wheel Offset Rear: +40
Tire Size Front: 235/35/19??
Tire Size Rear: 275/30/19??
Car is lowered 1.5" springs
I dont want any major rubbing or any at all if possible
Any help will be appreciated.
Thanks in advance,
Tito
Last edited by 5gears-IS; 03-29-17 at 05:27 AM.
#5354
Driver School Candidate
Join Date: Mar 2017
Location: FLORIDA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Wheel fitment
Heey fellas. I'm thinking about buying these wheel but I'm worried that the offset on the wheels won't clear the brakes. Does anybody know if the offset will clear the brakes or would I need spacers?
#5355
Forum Administrator
iTrader: (2)
What brakes do you have (is your car a 250 or 350)?
What's the disk fitment of the wheels (high pad / high disk)? Need to know that more than the offset.
What's the disk fitment of the wheels (high pad / high disk)? Need to know that more than the offset.