Reset oil maintenance light

Reply Subscribe

Thread Tools

Search this Thread

Feb 3, 2010 | 08:18 AM

MARINE61

Thread Starter

Driver School Candidate

Joined: Aug 2009

Posts: 1

Likes: 0

From: CA

Reset oil maintenance light

Anybody know how to reset the oil maintenance light?

Feb 3, 2010 | 08:22 AM

Evitzee

Lexus Champion

Joined: Sep 2006

Posts: 3,102

Likes: 8

From: Hill Country, TX

Quote:

Originally Posted by MARINE61

Anybody know how to reset the oil maintenance light?

Uh, how about reading the manual? If that is too difficult why not read the thread at the top of this board about frequently asked questions? Searching and reading are your friends.

Feb 3, 2010 | 08:29 AM

quang

Lexus Test Driver

iTrader: (8)

Joined: Jul 2009

Posts: 1,280

Likes: 4

From: CA

To reset the data, perform the following operations:
1. Push the “ODO/TRIP” button to change the display to blank.
2. Turn the ignition switch off.
3. Turn the ignition switch to “ON” with the trip meter "RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5 seconds after the ignition is turned on.

After the above operation, the master warning light comes on, a warning tone sounds and the above message appears to inform you that the engine oil maintenance data has been reset.