18" aftermarket wheels on 2IS?
09-10-09, 07:17 PM
#61
Lead Lap
Join Date: Jul 2009
Location: Brunei
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
yeah..i agree. CR Kai looks better..
oh..so for the rear +31 will be the lowest i can use? but u dont rub or anything with 10 width +36 on the rear right? i think going with 10 width will look sexier than 9.5..i dont want to have rubbing issues and no flush as well..had bad experiences with flush wheels.
oh..so for the rear +31 will be the lowest i can use? but u dont rub or anything with 10 width +36 on the rear right? i think going with 10 width will look sexier than 9.5..i dont want to have rubbing issues and no flush as well..had bad experiences with flush wheels.
09-10-09, 08:33 PM
#66
Weel CR Kai have different widths and offsets unless you custom order them from Work, so they dont have 10" wide but 9.5"
The dilemma is 18x9.5 +30 will rub, but only a tiny but so you will need to either use narrower tires (not good if you have bad roads) or roll the fender a bit.
18x9.5 +38 will be fine, but wont be as aggressive as what I have, but its way way better than the stock wheels, its only about half a pinky finger's width difference from the +30.
Get the rear wheel in Deep Concave
In the front 18x8.5 +37 will be fine and you wont be rubbing at all. Anything less than +37 I am not sure, you might rub during a turn (??) but front offsets are not my specialty since I cant deal with rubbing.
Get the front in Flat Face.
Its going to be hot
The spec for CR Kai:
http://workwheelsusa.com/media/wheel...Kai%20Spec.pdf
The dilemma is 18x9.5 +30 will rub, but only a tiny but so you will need to either use narrower tires (not good if you have bad roads) or roll the fender a bit.
18x9.5 +38 will be fine, but wont be as aggressive as what I have, but its way way better than the stock wheels, its only about half a pinky finger's width difference from the +30.
Get the rear wheel in Deep Concave
In the front 18x8.5 +37 will be fine and you wont be rubbing at all. Anything less than +37 I am not sure, you might rub during a turn (??) but front offsets are not my specialty since I cant deal with rubbing.
Get the front in Flat Face.
Its going to be hot
The spec for CR Kai:
http://workwheelsusa.com/media/wheel...Kai%20Spec.pdf
09-10-09, 10:29 PM
#68
i actually just ordered a set of cr kai because ive always wanted them....i got 18x8.5 +25 and 18x9.5 +20....my fenders are rolled..with my TE37s...iam 19x8.5 +35 with a 10mm spacer and a 19x9.5 +34 with a 15mm spacer... roll your fenders and u should b able to go a lot more aggressive and get the nice concave for the cr kai
The following users liked this post:
eddysoares (04-22-19)
09-10-09, 10:52 PM
#69
Lead Lap
Join Date: Jul 2009
Location: Brunei
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
can you post pics of your 2IS wongerZ? So get the wheels with low offsets to get a deeper concave, am i right? then just add spacers to get rid of the rubbing issue. correct me if im wrong wongerZ.
09-11-09, 08:06 AM
#73
18x9.5 +30 will fit no roll just shave the rear and run 245 or less tires ull be fine.
i put a 5mm spacer and made it +25. then there were problems but who cares when ur gangster! the front i rocked 18x8.5 +37 then used a 10mm spacer so offset was +27.messed up fenders but who cares... gangter fitment is 18-22 offset is for true ogs. ..
thanks paul . did i ever tell u i have a picture of u on my cluster to remind me that ur my idol!?
i put a 5mm spacer and made it +25. then there were problems but who cares when ur gangster! the front i rocked 18x8.5 +37 then used a 10mm spacer so offset was +27.messed up fenders but who cares... gangter fitment is 18-22 offset is for true ogs. ..
thanks paul . did i ever tell u i have a picture of u on my cluster to remind me that ur my idol!?
09-11-09, 11:10 AM
#75
18x9.5 +30 will fit no roll just shave the rear and run 245 or less tires ull be fine.
i put a 5mm spacer and made it +25. then there were problems but who cares when ur gangster! the front i rocked 18x8.5 +37 then used a 10mm spacer so offset was +27.messed up fenders but who cares... gangter fitment is 18-22 offset is for true ogs. ..
thanks paul . did i ever tell u i have a picture of u on my cluster to remind me that ur my idol!?
i put a 5mm spacer and made it +25. then there were problems but who cares when ur gangster! the front i rocked 18x8.5 +37 then used a 10mm spacer so offset was +27.messed up fenders but who cares... gangter fitment is 18-22 offset is for true ogs. ..
thanks paul . did i ever tell u i have a picture of u on my cluster to remind me that ur my idol!?