★★★★★ Official Enkei Owners Thread ★★★★★
#61
Driver School Candidate
Enkei PF01 Silver (18x8.5 +35 5x114.3)
Enkei PF01 Silver (18x8.5 +35 5x114.3)
225/40-18 CONTINENTAL EXTREME CONTACT DWS
BC Coilovers
-2% camber all around
5 mm spacers on rear wheels
225/40-18 CONTINENTAL EXTREME CONTACT DWS
BC Coilovers
-2% camber all around
5 mm spacers on rear wheels
The following users liked this post:
ChiefP (06-13-23)
#67
I've seen requests of pics of rpf1, so thought I'd add this.
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
#68
Lexus Test Driver
iTrader: (4)
I've seen requests of pics of rpf1, so thought I'd add this.
Attachment 334937
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
Attachment 334937
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
#69
None on the back. Jury is out on the front. I recently lowered it another 1/4 inch or so. Before I lowered it there was no rubbing. I suppose I could induce it, if I came over a bump like out of a parking lot, turning right quickly and putting on the brakes.
Oh, and no camber kit.
Oh, and no camber kit.
The following users liked this post:
jreancsu (11-18-20)
#75
My Enkei PF01s have finally been installed and are noticeably lighter than the OEM wheels. I went with 18x8.5 +35 for the fronts and 18x9 +35 for the rears. I think this track beast is finally complete. Enjoy the pics!
No plans to go to anything wider than 255 on the rear? You running in STR?