★★★★★ Official Enkei Owners Thread ★★★★★
11-03-12, 05:28 PM
#61
Driver School Candidate
Enkei PF01 Silver (18x8.5 +35 5x114.3)
Enkei PF01 Silver (18x8.5 +35 5x114.3)
225/40-18 CONTINENTAL EXTREME CONTACT DWS
BC Coilovers
-2% camber all around
5 mm spacers on rear wheels
225/40-18 CONTINENTAL EXTREME CONTACT DWS
BC Coilovers
-2% camber all around
5 mm spacers on rear wheels
The following users liked this post:
ChiefP (06-13-23)
07-06-14, 04:34 PM
#67
I've seen requests of pics of rpf1, so thought I'd add this.
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
07-06-14, 10:01 PM
#68
I've seen requests of pics of rpf1, so thought I'd add this.
Attachment 334937
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
Attachment 334937
Front
18x8.5x40mm 245/40
Rear
18x9.5x45mm 275/40
Car is lowered a bit,
gnd to wheel well
Front 26-26.25 (or so)
Rear 26 1/2 (or so)
Didn't like the look of Enkei Centre Caps, so got these carbon fibre ones off E-bay. I haven't decided if I like them yet.
07-07-14, 05:49 AM
#69
None on the back. Jury is out on the front. I recently lowered it another 1/4 inch or so. Before I lowered it there was no rubbing. I suppose I could induce it, if I came over a bump like out of a parking lot, turning right quickly and putting on the brakes.
Oh, and no camber kit.
Oh, and no camber kit.
are you drop on coil? Tire size and any fender mod or rub?
The following users liked this post:
jreancsu (11-18-20)
07-20-14, 11:05 AM
#75
My Enkei PF01s have finally been installed and are noticeably lighter than the OEM wheels. I went with 18x8.5 +35 for the fronts and 18x9 +35 for the rears. I think this track beast is finally complete. Enjoy the pics!
No plans to go to anything wider than 255 on the rear? You running in STR?