AWD 250 19" rims help
#1
Pole Position
Thread Starter
AWD 250 19" rims help
Whats up i have a 2006 awd is250 and am lowering it plus getting some 19"s.
Question one for the pros out there - which is the best spring set up for my car with lowest drop ?
Question two - any dope rim+tire(19's) suggestions for under 2k
want to get this car finished asap so i can get some pics up;] thanks in advance for any help.
Question one for the pros out there - which is the best spring set up for my car with lowest drop ?
Question two - any dope rim+tire(19's) suggestions for under 2k
want to get this car finished asap so i can get some pics up;] thanks in advance for any help.
Last edited by z4frosik; 12-09-07 at 09:38 PM.
#2
Pole Position
Thread Starter
If anything can some one tell me if the eibach is350 pro kit would work for sure on my car and what would the drop be ? if any one out there has done this.
Last edited by z4frosik; 12-09-07 at 10:27 PM. Reason: miss type
#3
Lexus Champion
I have an AWD and just lowered it with the Eibach is250 springs. its pretty low. for 2k you can get a pretty nice set of 19"s with tires. heres a pic of my IS250AWD lowered on my 20"s.
By the way..... Welcome to ClubLexus. Nice to have another AWD owner!!!!
By the way..... Welcome to ClubLexus. Nice to have another AWD owner!!!!
#5
I have an 07 fully loaded. I used Road Magnet Springs that gave it a 2" drop. The awd is taller than the standard 250-350. They were the only manufacturer to make springs for the awd.
I ended up with 19" Vellano VSM 3 piece wheels with stagered lips but still the same width and tire size of 235/35/19's. Wheels and tires ran about 4k.
I ended up with 19" Vellano VSM 3 piece wheels with stagered lips but still the same width and tire size of 235/35/19's. Wheels and tires ran about 4k.
Thread
Thread Starter
Forum
Replies
Last Post
jdmnysee
Suspension and Brakes
12
07-18-12 01:23 PM
dmunizjr
IS - 1st Gen (2001-2005)
4
04-12-12 10:34 AM