DIY Sport Pedals IS350 IS250 w/ Pictures!
#151
Got my set. Thanks for this DIY. I will be studying this very carefully. I did by SC and that required drilling holes and that was not easy, you needed a angled drill due to lack of space. I ended up borrowing from my co-worker.
I can not wait!
I can not wait!
#152
My set is coming from Sewell. As well as the others who have purchased from the same vendor...
I miss Sewell...
I miss Sewell...
#153
This install won't be as difficult for you then. Just getting the accelerator pedal assembly is gonna be quite a task. Also best to try and not drop that 10mm nut into the carpet insulation. There's a wide gap right under that top nut area where it can easily fall into. I would suggest blocking the gap with painter's tape or something coupled with a magnet bolt picker tool just for extra measure. GL.
#154
Thanks for the tip on the gap. What size of nut is it, 10mm? I can not wait to get my set.
#155
And I have the swivel adapter as well. Time to put it to good use!
#156
The set is coming in on TUE, can not wait to get them installed!
#157
My F Sport pedals will be delivered tomorrow, and they will be installed by COB!
#158
#159
#160
I like it a lot! I have the set on my SC as well. Thanks for the inspiration. I must remember to put tape on the hole so as not to lose the nut.
#161
The clips stayed on the footrest, which was fine. I took the clips off the new foot rest an shoved it right there...done.
Tomorrow I will tackle the gas pedal install.
Thanks for the many tips on this thread.
I can not wait.
Tomorrow I will tackle the gas pedal install.
Thanks for the many tips on this thread.
I can not wait.
#163
Thanks, I like the all weather , easy to clean. I miss Sewell.
#164
Well I thought I had a set of the universal flexible socket adapter, could not find it last night! I tried the normal one, that is a beatch to get into, let alone turn. I quit, I need to get a set of the flexible adapters!
Tip, put double sided tape on the socket so you not lose the bolt...!
Tip, put double sided tape on the socket so you not lose the bolt...!
#165
A friend let me borrow a 3/8 Universal Flexible Adapter. FAIL, I could not get it to work.
Dropping by the store to get a ¼ set! I am pretty sure I will knock it out.
I do have a bruised rib trying to get it done last night, it does not help if you are a bit tipsy!
Dropping by the store to get a ¼ set! I am pretty sure I will knock it out.
I do have a bruised rib trying to get it done last night, it does not help if you are a bit tipsy!