I recently did my valve cover gasket on my 06 is350 and before I have no check engine light. But now I’m getting a P0368. However when I was changing the gasket, I pulled the cam shaft position sensor wire out on accident. So I’ve bought a new sensor and new connector so I can reconnect the wires. However when I pulled the wires out I didn’t check where they were at. So I have 2 black wires and 1 yellow. I’ve tried to swap the wires around to see which one is the right one. But only one stands out to me. When I cleared my code the cel would blink once and still be there. (My passenger side cam shaft sensor are different color green,red,yellow. I don’t have a volt meter.) Please help me out!!